Configuration Users Guide
The WebConf Tool is the Zynthian Web Configuration Tool, a website hosted inside your Zynthian device that allows you to configure and inspect the settings and attributes of your Zynthian.
- 1 Login
- 2 Dashboard
- 3 Library
- 4 Hardware
- 5 Software
- 6 Interfaces
- 7 System Management
You can access the Webconf tool from any computer using a web browser. Your Zynthian Box must be connected to your local network, or directly to your computer with an Ethernet cable (link local, point to point).
To connect your Zynthian Box to your local network you can use an Ethernet cable connected from your router to your Zynthian Box. Also, if WiFi has been configured previously in your Zynthian, you should be able to connect by WiFi.
To access your Zynthian box from your browser, you can use either of these 2 methods:
- Browse to http://zynthian.local. This doesn't work in all devices. Many Windows-PCs and mobile devices don't fully support the mDNS protocol that enable the use of named addresses on a local network.
- If you your browser can’t find the zynthian.local address, you will then need to figure out what IP address has been assigned to your Zynthian Box. For more details, see Finding your IP address. Once you have your Zynthian's IP address (xxx.xxx.xxx.xxx), you can browse to http://xxx.xxx.xxx.xxx.
The Dashboard displays basic configuration information about your Zynthian.
The library is where multiple configuration snapshots, Instrument soundfonts, Presets, and Capture files are managed.
The Snapshots is where you can manage your snapshots (a stored configuration of instruments and settings.)
Bank/Program refers to MIDI Program Change commands that can enable a specific snapshot.
Soundfonts are files which contain a set of sampled sounds for an instrument.
Captures (Audio & MIDI)
Manage files that contain musical performance data that you have captured.
Configure soundcards and audio adapters
Configure the touchscreen display.
Configure wiring for the encoders/knobs and switches.
Update the Zynthian OS and associated application software.
configure the Pianoteq plugin. (enable paid license)
Manage the installed plugins.
MIDI configuration page. Setup and store different profiles that are MIDI configurations.
Manage storage of MIDI configuration profiles
Master Channel, Active Layer, MIDI over Network, Preload Presets on Note, etc.
Visit here to Filter/Router
Displays all received MIDI messages. Useful for debugging MIDI connection and configuration.
Customize the user interface.
Colors, Fonts, Sizes, etc.
Restore Status on Startup
Display a log of User Interface actions for debugging.