Building a Zynthian Box using an official Kit v3

From ZynthianWiki
Revision as of 11:23, 8 August 2020 by Jofemodo (Talk | contribs) (Mount the MIDI activity LEDS)

Jump to: navigation, search


This tutorial is intended for those who are building a Zynthian Box using one of the official kits, that i offer here:

Zynthian Shop

Specifically, these instructions are for assembling kit v3 (version 3), those kits using the Zynaptik circuit and the ZynScreen v1.4 display.



List of Materials

  • Zynthian Basic Kit v3 (4 x controller v3 + zynaptic circuit + ribbon bus cable)
  • ZynScreen v1.4 (3.5" touch-display + controller driver)
  • Raspberry 3 Model B or B+
  • HifiBerry DAC+ADC souncard
  • Case kit v3, including nuts, bolts and connectors
  • Power adapter for Raspberry Pi (5.1v 2.4A with microUSB connector)
  • 16GB SD Card (Use a high-quality card)

Some definitions


It's an open project with the goal of creating an Open Synth Platform based in Free Software and Open Hardware Specifications & Designs (when available)

Zynthian Software

The Zynthian Software stack consist of:

+ GNU Linux Operating System: Raspbian Jessie (Minibian is used in the most recent SD images)
+ Jack Audio Daemon
+ A collection of standalone Synth Engines & LV2 Plugins (see Supported Synth Engines & Plugins)
+ MOD-HOST + MOD-UI software, from ModDevices (github repositories)
+ Zynthian User Interface (github repository)
+ Zynthian Webconf Tool (github repository)

All the software used by Zynthian is Free Software (free as in freedom, not as in free beer), and it's covered by the GPL license or similar. If you don't know what Free Software is, take a look at this link:

What is Free Software?

The easiest way of getting the software is downloading the last official SD image from here:

Download Zynthian "Buster RC-2" SD-image

It's a 8 GB compressed image file (plenty of soundfonts) compiled for Raspberry Pi 3.

These SD-card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!

After downloading the SD-image, you have to write it to your micro-SD card. You need a micro-SD card with a minimum size of 16 GB.

If you don't know how to do it, you can use Etcher (free software, works on Mac, Windows or Linux) to flash the image onto the micro-SD card. Or do it manually! There is a really good manual for this at this link.

you can also build your own SD image following these instructions:

Building the SD Image using the Setup Script

Zynthian Box

A Zynthian Box is a hardware device, a small digital computer designed to run the Zynthian Software. It's currently based on the Raspberry Pi platform, but it could easily be adapted to other computer platforms.

This is a sketch with the components the official Zynthian Box is made of:

Zynthian hardware scheme.png

In the project's repositories you can find all the electric schemes, PCB specifications, Herber files, etc. to build your own Zynthian Box from scratch:

- Zynthian Hardware Repository
- Zynthian Case Repository

The official version is the canonical reference. Of course, you don't have to build the official version. You can build your customized Zynthian Box modifying and improving what you want. If you do so, feedback would be appreciated.

Zynthian Bundle All Kit v3

A Zynthian Kit is a set of electronic and mechanic parts. The official Zynthian Bundle All Kit v3 consists of these specific parts:

+ 4 x Controller Modules + Wiring 
+ 1 x Zynaptik Module: MIDI Ports + extended I/O
+ 1 x ZynScreen 3.5': Touch-Display + Controllers circuit
+ 1 x Main ribbon bus cable

IMG 2461.JPG

These generic parts:

+ 1 x Raspberry Pi 3
+ 1 x Hifiberry DAC+ADC

IMG 2377.JPG

And the aluminium case:

+ 1 x Zynthian Aluminium Case
+ 1 x Connectors
+ 1 x Bolts & Nuts

IMG 2379.JPG

IMG 2384.JPG

Unboxing the Official Kit V3, by Sébastien Marty

Assembling your Zynthian Box


Assembling your Zynthian Kit V3 is not difficult at all: you need your attention, a screwdriver, and an adjustable wrench. You don't need to solder anything, just put it together and connect the wires.

Read the instructions and observe the detailed photos carefully. If you get in trouble you can ask the community:


Please, handle electronic parts with care, specially the display, as they are easily damaged.

Secure the Jack connectors

Insert the jack connectors from inside the box and secure them with the washers and nuts from the inside. The washers will keep the nut from damaging the case.

IMG 2397.JPG IMG 2398.JPG

Secure the MIDI connectors

Insert each MIDI connector, from the outside and secure them with the bolt from the inside.

IMG 2401.JPG IMG 2402.JPG

Mount the MIDI activity LEDS

Insert the 3 LEDS in the case from the outside, leaving the short lead at left. Make sure you push the LEDs by the plastic around the LED, not the LED itself.


When it's done, you have to plug the LED wires into the 2 spare "DUPONT" connectors from the MIDI harness (green & yellow wires). Polarity is important, so don't cross the wires:

* JST Green wire (1) => LED's Anode (LED's long lead)
* JST Yellow wire (2) => LED's Cathode (LED's short lead)

Since the LED's leads are too long, you will want to cut them down to about 7-8mm. Make sure you remember which lead is the short one.



If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short the JP1 & JP2 jumpers on the zynaptik board.

Assemble the Main Computing Block

The main computing block consists of the Raspberry Pi and the HifiBerry soundcard,and is assembled using these separators and bolts

IMG 1293.JPG

1. Fix the 2x4 separators to the Raspberry Pi. Put the longest of the two on top of the Pi and she shorter at the bottom.
2. Connect the Hifiberry soundcard to the Raspberry Pi.
3. Fix the 4 screws on top of the HifiBerry to fix it in place.

IMG 1353.JPG

IMG 2393.JPG

IMG 2395.JPG

Secure the Main Computing Block

After assembling the main computing block, secure it to the case. Use the 4 remaining black M2.5 screws to secure it to the bottom of the case (see photo above).

IMG 2407.JPG

Secure the Zynaptik module

Secure the Zynaptik module to the case using 4 x separators and 8 x M2.5 screws. Begin by mounting the separators to the bottom of the case, and attach the module to the separators using the remaining screws.

IMG 1294.JPG

IMG 2410.JPG

The zynaptik board has some extra circuitry which doesn't have anything soldered on it. These are used for adding extra functionality to the board.

Mount the Display


Please, handle electronic parts with care, specially the display, as it is easily damaged.

The screen is secured with these 4 screws, nuts, and nylon separators. Mount the screen by screwing the screws from the outside and fixing them with the bolts from the inside. The separators go between the screen and the case. Remember to remove the protective film from the screen before mounting it.

IMG 1295.JPG

IMG 2423.JPG

Mount the Controllers

Plug a wire on each controller. Fix the controllers in each corner using the nuts and washers attached to them



IMG 1401.JPG

Attach the knobs

You should attach the knobs into the encoders before closing the case. Push the knobs unto the encoders while pushing the encoder with a finger on the PCB board. This will avoid putting too much pressure on the encoders, which can break them. The knobs can be very tight, and a bit of water can be used as lubricant to help with this.

Attach the rubber feet

IMG 2536.JPG

Connecting everything

The Zynthian Kit 3 is designed to use JST connectors which can't be plugged in wrong, so connecting everything is straight-forward:

Connect the Ribbon Bus cable

Connect the Main Ribbon Bus cable to the Raspberry Pi's 40-pin header and to the Zynaptik module. The red wire is pin 1, so if you are looking at the case from the front, it should be on the right.

Ribbon.jpeg Ribbon&Hifi&Zynaptik.JPG

Connect the Controllers

Connect the 4 controller cables to the 4 controller connectors on the ZynScreen (CTRL1, CTRL2, CTRL3, CTRL4)


Connect the MIDI connectors & activity LEDs

Connect the 3 cables from the MIDI connectors to the MIDI-IN, MIDI-OUT and MIDI-THRU connectors on the Zynaptik module.



If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short the JP1 & JP2 jumpers on the zynaptik board.

Connect the Audio Output Jack connectors

Connect the audio output jack connectors to the audio-output header to the Hifiberry soundcard:

Dacplus-adc-top audio-out.jpg IMG 2414.JPG

The black wire on the "R" pin, white on the "L" one and red on "GND" (middle).


Some kits have flipped the red and white wires. This is not a problem. Simply look at the black wire.

Connect the Audio Input Jack connector

This step depends of the specific model of your soundcard:

HifiBerry DAC+ADC Standard

Connect the input jack connector to the audio-input header on the sound card using the 3-pin Dupont connector:

Dacplus-adc-top audio-in.jpg IMG 2416.JPG

The black wire should be connected to pin 3, red wire to pin 2 and white wire to pin 1. Looking at the first photo, numbering is left to right.


Some kits have flipped the red and white wires. This is not a problem. Simply look at the black wire.


Due to hardware problems, Hifiberry has recently changed (September 2019) the specification of the DAC+ADC. It seems that the Balanced Audio input doesn't work as expected. Instead it works like a simple not-balanced input. You can read more about this subject on this forum thread.
In order to take advantage of the stereo connector, which should be a mono balanced input but isn't, you can get an unbalanced stereo input by connecting both audio channels to the connector. The problem is that the 3-wire Dupont connector included in official kit. You have to cut the second wire (red or white) and solder a single Dupont connector, connecting it to the pin 5 on the Hifiberry. Please check the Hifiberry DAC+ADC specification


Connect the input jack connector to the audio-input header on the sound card using the three 1-pin Dupont connectors as indicated in the image:


This way you will have the balanced input connected on the Right channel. If you want to use the Left channel, take a look at the Hifiberry DAC+ADC PRO specification.

Connect the Display

connect the ribbon's 26-pin connector to the display's connector. Pay attention to the orientation. The red wire should be the pin 1, which as marked on the display's PCB surface.


At this point, your Zynthian Box should look like this:


Building and Testing the Official Kit V3, by Sébastien Marty

Testing your Zynthian Box

And that's all. Your Zynthian Box is almost ready to boot. I recommend that you double-check everything before trying to boot.

Double-check the parts and wiring

It's easy to make a mistake while assembling the parts or connecting the wires. Some errors can be dangerous for the electronic components (such as short circuits) so it's better to be sure that everything is correctly assembled and connected.

Pay attention to ribbon bus connection and verify that red wire is on pin 1 for every connector. Pay attention to the audio jack connectors and make sure they are connected correctly to the Hifiberry sound card.

First Boot

When you are sure that everything is in its place, it's time to boot the machine:

1. Insert the SD-card with the zynthian image. If you don't have one yet, read this. You can insert the SD-card through the "window" on the bottom-side of the case. 
2. Plug the mini-usb power connector. A good 5V micro-usb charger is recommended (> 2 Amp).

These are the stages that you should see while booting:

1. After 5-10 seconds, it will show the Zynthian splash screen
2. After 3-4 seconds, it will go black
3. If you are using a fresh zynthian image and it's the first boot, the stages 1 and 2 will be repeated
4. After 5-10 seconds, the zynthian UI will be shown

If you get the Zynthian UI, then you have assembled the Zynthian box correctly. Congratulations!

IMG 2490.JPG

If you don't get an error screen or a blank screen, you probably you made a mistake during the assembly. You have to locate and solve the problem(s).

If you are using the Aruk RC-3 SD image (which you should), you will notice that the controllers are not working at all. This SD image is pre-configured for working with the kit v2, so you need to configure the software for working with the kit v3. The simplest way of doing it is using the webconf tool:

  • Connect your zynthian to your local network using an ethernet cable (RJ-45).
  • From your web browser, access the zynthian's webconf tool by typing "zynthian.local" in the address bar. If this doesn't work for you, you should try with the IP. You can get the IP of your zynthian by navigating to the Admin Menu and clicking "Network Info". You should do that by using the touch interface: Click the top bar with a stick (or your nail, if it's not too wide) until you are in the Admin Menu. Once you are there, go down and click "Network Info".
  • Type the password (raspberry) and log into the webconf tool.
  • Once you are logged in, you have to access Hardware->Kit and select "Kit V3".
  • Save the changes and reboot your Zynthian.

Test the Controllers & UI

If you get into the Zynthian UI, then you should be in the 'Layer list' screen. Let's start testing that your controllers are working OK.

1. Rotate the SELECT controller up & down for selecting the different options in the Layers menu. 
2. Push SELECT to create a New 'Synth Layer'. You should get into the 'Engine Selection' screen.

IMG 2496.JPG

If it doesn't work, try rotating/pushing the 'learn/snapshot' controller. Perhaps you have cross-wired the 3 & 4 controllers and in that case, you have to fix the wiring. If it doesn't work, try pushing the other two controllers and rotating the controllers. If something happens, most probably you have reversed the wiring when connecting the controllers. Double-check the wiring again.

3. Rotate the SELECT controller to choose the engine you want to instance for the new layer. 

The selector must go down when rotating clockwise and go up when rotating counter-clockwise. If the rotation sense is reversed, you should check the wiring. Perhaps one of the connections are faulty. The wires' color sequence should be red, black, yellow, green.

4. Select the ZynAddSubFX engine, select channel #1, select bank 'Collection' and preset 'Metal Drips'. 

IMG 2497.JPG

You should get to the 'Instrument Control' screen.

IMG 2500.JPG

5. Rotate every control to test that it works and that the rotation sense is correct. 

If one of the controllers doesn't work correctly, check the wiring again.

6. Push SELECT to move to the next controller screen. Bold push (a push lasting about 1 second) to select a controller screen from the list.
7. Push BACK. You should go back to the 'Preset Selection' screen. 

IMG 2499.JPG

8. Push BACK again. You should go back to the 'Bank Selection' screen. 

IMG 2498.JPG

9. Push LAYER again to return to the 'Layer Selection' screen. Try to create another layer following the same procedure.

IMG 2509.JPG

10. Push 'SNAPSHOT' to get into the 'Snapshot' screen. Select 'New Snapshot' and your first snapshot will be stored.

IMG 2506.JPG

If everything is working OK, then you should read the User's Guide and start enjoying your Zynthian Box, but before that ... why not enjoy it a little bit? Connect your MIDI keyboard, your speakers and check this out:

Bank 'net-wisdom', Preset 'Vangelis Saw - C'

Keep pushing a single note (or a chord) and move the cutoff and resonance controllers. Play around a bit and have some fun

Test the Audio Output

1. Connect the audio output (RCA or Jack connectors) to your amplifier or auto-amplified speakers.
2. Boot your Zynthian. You should be in the initial 'Layer Selection' screen.
3. Push BACK and you will get into the 'Admin' screen.
4. Select 'Audio Test' option and push 'SELECT'. You should hear the test audio-track: a nice afrocuban track
5. Push 'BACK' to stop the playing, and 'BACK' again to return to the "Layer Selection' screen.

If you hear nothing, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to locate and solve the problem(s).

Test the MIDI subsystem

1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
2. Boot your Zynthian, select FluidSynth engine, channel #1 and 'TimGM6mb' bank. Select an instrument, like "Piano 1".
3. You could add more layers to complete the band
3. Push BACK, holding the switch down for more than 2 seconds. You should get to the 'Admin' screen.
4. Select 'MIDI Test' option and push 'SELECT'. You should hear the test midi-track ('Take Five') interpreted by your Zynthian's band
5. Push 'BACK' to stop the playing

If you hear nothing, please, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to locate and solve the problem(s).

Test the MIDI-USB inputs

1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
2. Boot your Zynthian, select ZynAddSubFX, channel #1, bank and an instrument
3. Connect a MIDI-USB keyboard to any USB port. The keyboard should be configured to use channel #1.
3. After 2-3 seconds , play something with your keyboard. A simple Chopin's Nocturni should be enough. You should hear your music. If you don't like it, you should probably take some piano lessons, like me.

If this doesn't work, you have to locate and solve the problem(s).

Test the MIDI-IN connector

1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
2. Boot your Zynthian, select ZynAddSubFX, channel #1, bank and instrument.
3. Connect your keyboard's MIDI-OUT to the Zynthian's MIDI-IN using a MIDI cable.
3. After 2-3 seconds, play something with your keyboard. A single melody can do the trick.

If this doesn't work, you have to locate and solve the problem(s).

Final steps

Once everything is in its place and you have tested that it works, it's time to close the case

Close the case

Take your time to bend and push the cables to get a good fit when closing the case. The ribbon bus cable is pre-bent to make this process easier.


Finally, fasten the 8 sheet-threaded bolts to secure the case, 4 on each side.


Update your Zynthian Box

If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and making the controllers are working, is update the software:

- connect your Zynthian Box to your router using an ethernet cable
- from the admin menu, click update software
- from the admin menu, click restart UI (or reboot)

The update process can take some time. Be patient. If you get an error message while updating, please, ask in the forum. You can send a photo or description of the error message.

You can also update the software using the webconf tool, or from the command line.

Locating and Solving problems

In this section i will try to give you some tips for locating and solving the problems you may have.

For finding and solving problems, I really recommend connecting a HDMI display to the Raspberry Pi. This will show you all information during the boot process. If you connect a USB keyboard to the Pi, you can login into the system and get extra information, inspect the logs, etc.

The display don't show the zynthian splash screen on boot

In that case, probably the system is not booting correctly. You could try to connect a HDMI display and see if the system is booting. If you can't see the boot sequence, then you should re-flash your SD-card with the Zynthian image. Also check that your image file is correct by using the SHA1 signature.

You get the zynthian error screen with the IP

Your hardware seems to be configured incorrectly. You should access the webconf tool and configure your hardware.

Your controllers doesn't work

You made a mistake while connecting the controllers, or your hardware (wiring layout) is incorrectly configured. You should access the webconf tool and configure your hardware.

You can't solve the problem

If you can't find a solution for your problem, ask the community:

Also, if you found a solution for a problem not described here, please send feedback to the community so others can see how you solved the problem

Technical Reference

Finally, I have included some detailed schematics. People hacking the standard Zynthian design would find it very useful. If you have a problem and need to "debug", you could find it useful too.

Zynthian controller single2 smd.svg

Zynthian zynaptik.svg

ZynScreen v1.3.svg

You can find all this info and much more in the project's Hardware Repository.