Changes

This will print around 3:30 hours on average commodity printers these days that can easily do 250mm/s such is Elegoo's Neptune 4 or Anycubic Kobra 2.

This will print around 3:30 hours on average commodity printers these days that can easily do 250mm/s such is Elegoo's Neptune 4 or Anycubic Kobra 2.

[https://youtu.be/5RSKHbG7Gxg Here] is a timelapse of the print.

<embedvideo alignment="inline" dimensions="263" service="youtube" description="Timelapse of this first print.">https://youtu.be/5RSKHbG7Gxg</embedvideo>

Then print bottom part. Lay bottom side of bottom part onto the printer bed. Use the same settings as for previous  parts. Bottom part will be printed much quicker.

Then print bottom part. Lay bottom side of bottom part onto the printer bed. Use the same settings as for previous  parts. Bottom part will be printed much quicker.