Difference between revisions of "Build a Zynthian"

From ZynthianWiki
Jump to navigation Jump to search
Line 67: Line 67:
 
| 18 || [http://www.ebay.de http://www.ebay.de] || Poti knob || Poti knob for Rotary encoder (Pos. 17) ||4|| 1,50
 
| 18 || [http://www.ebay.de http://www.ebay.de] || Poti knob || Poti knob for Rotary encoder (Pos. 17) ||4|| 1,50
 
|-
 
|-
| 19 || [http://www.zynthian.org http://www.zynthian.org] || Encoder PCB || PCB for encoders ||2|| xx
+
| 19 || [http://blog.zynthian.org http://blog.zynthian.org] || Encoder PCB || PCB for encoders ||2|| 10,00
 
|-
 
|-
| 20 || [http://www.zynthian.org http://www.zynthian.org] || 2in1 PCB || PCB for MIDI and GPIO extension ||1|| xx
+
| 20 || [http://blog.zynthian.org http://blog.zynthian.org] || 2in1 PCB || PCB for MIDI and GPIO extension ||1|| 10,00
 
|-
 
|-
| 21 || [http://www.zynthian.org http://www.zynthian.org] || Main cable || Raspberry main cable set||1|| xx
+
| 21 || [http://blog.zynthian.org http://blog.zynthian.org] || Main Bus Ribbon Cable || Raspberry Main Bus Ribbon Cable ||1|| 20,00
 
|-
 
|-
| 22 || [http://www.zynthian.org http://www.zynthian.org] || Small cable || Small cable connectors ||3|| xx
+
| 22 || [http://blog.zynthian.org http://blog.zynthian.org] || Mini-ribbon cable || Mini-ribbon cable (6 pin female connector to 6 female jumper connectors ||3|| 3,00
 
|-
 
|-
 
|}
 
|}
  
'''Note:''' There is no case in this BoM - You have to build your own!
+
'''Notes:'''
 +
* Pos. 19-22 are directly ordered from Zynthian.
 +
* There is no case in this BoM - You have to build your own!
  
 
== Making the PCBs ==
 
== Making the PCBs ==

Revision as of 12:31, 6 April 2016

1 How to build a Zynthian (Prototype-3)

Manual is currently in development! (20150406)

1.1 Prerequireries

Want to join the Zynthian community? No problem! Build your own one is not very difficult.

1.1.1 Needed competences

For building the hardware you should have the following competences:

  • Soldering
  • Not to be afraid working with electronic hardware and parts
  • Basic understandment of reading electronic circuit diagrams

1.1.2 Tools

  • Screw drivers
  • Soldering iron
  • Tin-solder
  • Side cutter

1.2 Hardware

1.2.1 Bill of Material

Here is a list of hardware you need. I have noticed also where I bought the hardware and the price. This items are bought in February 2016 in Germany, so all descriptions are in german and prices are in EUR. If you live in other countries there maybe are better sources of supply for you in your home country.

No Shipper Order no. Description Pieces Price per piece [€]
1 http://www.reichelt.de 1N 4148 Planar Epitaxial Schaltdiode, DO35, 100V, 0,15A 1 0,04
2 http://www.reichelt.de 6N 138 OPTOKOPPLER 1 0,58
3 http://www.reichelt.de RASPBERRY PI 2 Raspberry Pi 2, 4x 900 MHz, 1 GB RAM 1 37,50
4 http://www.reichelt.de RPI HB DAC+ RCA HiFiBerry DAC+ RCA, Raspberry Pi Shield 1 35,90
5 http://www.reichelt.de 1/4W 220 Kohleschichtwiderstand 1/4W, 5%, 220 Ohm 1 0,10
6 http://www.reichelt.de 1/4W 1,0K Kohleschichtwiderstand 1/4W, 5%, 1,0 K-Ohm 1 0,10
7 http://www.reichelt.de 1/4W 10K Kohleschichtwiderstand 1/4W, 5%, 10 K-Ohm 1 0,10
8 http://www.reichelt.de MKS-02 100N WIMA Folienkondensator, Rm 2,5mm 100nF 4 0,15
9 http://www.reichelt.de GS 18P IC-Sockel, 18-polig, superflach, gedreht, vergold. 1 0,32
10 http://www.reichelt.de GS 8P IC-Sockel, 8-polig, superflach, gedreht, vergold. 1 0,19
11 http://www.reichelt.de SL 2X25G 2,54 2x25pol.-Stiftleiste, gerade, RM 2,54 1 0,24
12 http://www.reichelt.de MAB 5S DIN-Buchse, 5-polig 1 0,24
13 http://www.reichelt.de NTA 176 6,3 Mono-Klinken-Bu. auf Cinch-St. 2 0,35
14 http://www.reichelt.de NT MUSB 2 SW Micro-USB Steckernetzteil, schwarz, 5 V, 2 A 1 8,40
15 http://www.segor.de MCP23008-E/P MCP23008 8 port I2C-GPIO extender 1 2,10
16 http://www.amazon.de Adafruit PiTFT 2.8" Adafruit PiTFT Touchscreen Display, 2,8 Zoll, für Raspberry Pi Computer 1 32,00
17 http://www.ebay.de 12mm Rotary Encoder Switch Rotary Encoder with switch, 20 steps 4 0,60
18 http://www.ebay.de Poti knob Poti knob for Rotary encoder (Pos. 17) 4 1,50
19 http://blog.zynthian.org Encoder PCB PCB for encoders 2 10,00
20 http://blog.zynthian.org 2in1 PCB PCB for MIDI and GPIO extension 1 10,00
21 http://blog.zynthian.org Main Bus Ribbon Cable Raspberry Main Bus Ribbon Cable 1 20,00
22 http://blog.zynthian.org Mini-ribbon cable Mini-ribbon cable (6 pin female connector to 6 female jumper connectors 3 3,00

Notes:

  • Pos. 19-22 are directly ordered from Zynthian.
  • There is no case in this BoM - You have to build your own!

1.3 Making the PCBs

1.3.1 Step 1: 2in1 board

1.3.2 Step 2: Encoder boards

1.3.3 Step 3: Pin row on the Hifiberry

1.3.4 Checking everything

1.4 Connecting the cables

1.4.1 TFT

1.4.2 2in1

1.4.3 Encoder

1.5 Creating the SD

1.5.1 Getting the Image

1.5.2 Writing the image to the SD card

1.6 First boot

1.6.1 Testing

1.6.2 Something won't work?