Zynthian TODO list
Jump to navigation
Jump to search
1 BUGS
- Maintain Controller Values for each channel/preset. Currently, display values are lost when changing screen. (jofemodo)
2 SOFTWARE DEVELOPMENT
- Save/Restore Status => Define Status ;-)
- Feedback Controller Values from Synthesizer (initial loading).
- Controller Configuration per Preset/Channel => MIDI / OSC
- Improve Carla Integration => MIDI channels, MIDI routing, etc.
- Improve Dexed Integration => Bank Selection / Instrument Names
- PC connection => ethernet to ethernet/usb, setting up DHCP in Zynthian and giving an IP to PC (jofemodo)
- Native GUIs in PC => XWindows protocol, VNC, Web-VNC, ...
- Web Interface => WIFI config, ...
- MODDEVICES integration => Study (holger) (Just getting a ModDuo today :-) )
- Show CPU and RAM usage on display
- SD card read-only implementation => testing (holger)
- Adding support for more (external) controllers (MIDI/OSC/...)
- Compiling and Testing a RT kernel (holger)
- Add GIG soundfont support to LinuxSampler engine (jofemodo)
- Implement user's data directory (zynthian-my-data) (jofemodo)
3 HARDWARE DEVELOPMENT
- Improve 2in1 circuit, add MIDI-OUT & MIDI-THROU
- Headphones circuit
- Audio Input (ADC)
- Balanced Audio Outputs
- Leds for MIDI-IN, AUDIO-OUT, etc.
- New 2 in 1 pcb with simple connections and cables reduction (paulfalduto)
4 CASE DEVELOPMENT
- Fix/Improve 3D Printing Box Design (paulfalduto)
- Bolt holes for 2in1 circuit
- The top is too thick and can't screw the nuts in the rotary encodern. Change the top design to be a little thinner.
- The screen rectangle is too big and you see the "ugly" part of screen. Using the original size would be nicer. Also, perhaps can give some angle to the screen border to minimize shadow when looking from the side.
- The Zynthian logo in the top is missing
- The external bolt supports should not be 90º in the down side
- Fix surface defects
- Lasser Cutter Dessign (for wood/metacrilat)
5 DOCUMENTATION
- Improve User's Guide (jofemodo)