Difference between revisions of "Zynthian Updating"

From ZynthianWiki
Jump to navigation Jump to search
 
(20 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and getting the controllers working, is updating the software. You can do it easily from the Zynthian's UI:
+
===Important notice===
  
−
* Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. You can also configure the WIFI connection.
+
Zynthian runs on top of a basic Debian Linux system. It is not recommanded at all to do the traditional "apt-get update & apt-get upgrade" commands: this could break your Zynthian system.
−
* Click '''update software''' from the UI's Admin Menu
 
−
* Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
 
  
−
You can also do it from the command line using this command:
+
'''You have been warned !!!'''
  
−
   /zynthian/zynthian-sys/scripts/update_zynthian.sh
+
If you are using an official Zynthian SD Image, after booting up your Zynthian Box, you probably may want to update the software to get the latest fixes and improvements.
 +
 
 +
===Updating from the UI===
 +
 
 +
If your Zynthian's UI is working OK and you can control the interface using the knobs or the touch screen, you can update your software very easily:
 +
 
 +
# Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. Alternately, you can configure the WIFI connection using the Webconf tool.
 +
# Click '''update software''' from the UI's Admin Menu
 +
# Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu. Your zynthian should do this automatically, so most probably you don't need to do this step by hand.
 +
 
 +
{{WarningBox|Please, note that using WIFI connection for updating is not recommended. If your connection is not stable this could break your system.}}
 +
 
 +
===Updating from the Browser (webconf)===
 +
 
 +
You can also update your zynthian from your browser, using the Webconf tool that should be available at one of these addresses:
 +
 
 +
   http://zynthian.local
 +
 
 +
  http://zynthian.lan
 +
 
 +
or
 +
 
 +
  http://#ZYNTHIAN_IP#
 +
 
 +
{{NoteBox|You can see the zynthian's IP in the admin menu -> network info.}}
 +
 
 +
===Updating from the CLI===
 +
 
 +
Finally, you can update from the command line, using this command:
 +
 
 +
  update_zynthian.sh
  
 
If you don't know how to access your zynthian using the command line, read this:
 
If you don't know how to access your zynthian using the command line, read this:
  
−
* [[Accessing Zynthian from your computer|Accessing Zynthian from other devices]]
+
  [[Accessing Zynthian from your computer|Accessing Zynthian from other devices]]

Latest revision as of 11:35, 17 November 2026

1 Important notice

Zynthian runs on top of a basic Debian Linux system. It is not recommanded at all to do the traditional "apt-get update & apt-get upgrade" commands: this could break your Zynthian system.

You have been warned !!!

If you are using an official Zynthian SD Image, after booting up your Zynthian Box, you probably may want to update the software to get the latest fixes and improvements.

2 Updating from the UI

If your Zynthian's UI is working OK and you can control the interface using the knobs or the touch screen, you can update your software very easily:

  1. Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. Alternately, you can configure the WIFI connection using the Webconf tool.
  2. Click update software from the UI's Admin Menu
  3. Click restart UI (or reboot) from the UI's Admin Menu. Your zynthian should do this automatically, so most probably you don't need to do this step by hand.

WARNING!!

Please, note that using WIFI connection for updating is not recommended. If your connection is not stable this could break your system.

3 Updating from the Browser (webconf)

You can also update your zynthian from your browser, using the Webconf tool that should be available at one of these addresses:

 http://zynthian.local
 http://zynthian.lan

or

 http://#ZYNTHIAN_IP#

Note:

You can see the zynthian's IP in the admin menu -> network info.

4 Updating from the CLI

Finally, you can update from the command line, using this command:

 update_zynthian.sh

If you don't know how to access your zynthian using the command line, read this:

 Accessing Zynthian from other devices