Difference between revisions of "Zynthian Software"
Jump to navigation
Jump to search
(Created page with "The easiest way of getting the software is downloading the last ''official'' SD image from here: '''[https://discourse.zynthian.org/t/merry-zynthians-and-happy-new-sd-image/...") |
m (Add Etcher) |
||
| Line 5: | Line 5: | ||
This SD-image include all the zynthian software properly configured and ready to use. Plug and play! ;-) | This SD-image include all the zynthian software properly configured and ready to use. Plug and play! ;-) | ||
| − | After downloading the SD-image, you have to write it to a SD-card. Depending on your OS you have to choose how to create the SD-card. You need a minimum size of 16GB for the full ''Gorgona'' image and 8GB for the ''Gorgonilla'' lite image. There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link]. | + | After downloading the SD-image, you have to write it to a SD-card. Depending on your OS you have to choose how to create the SD-card. You need a minimum size of 16GB for the full ''Gorgona'' image and 8GB for the ''Gorgonilla'' lite image. |
| + | |||
| + | Use Etcher https://etcher.io/ (free software works on Mac, Windows or Linux) to flash the image onto the SDcard. | ||
| + | |||
| + | Or do it manually:There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link]. | ||
If you prefer, you can build your own SD image following these instructions: | If you prefer, you can build your own SD image following these instructions: | ||
[https://discourse.zynthian.org/t/new-sd-image-setup-script/283 Building the SD Image using the Setup Script] | [https://discourse.zynthian.org/t/new-sd-image-setup-script/283 Building the SD Image using the Setup Script] | ||
Revision as of 22:06, 15 August 2017
The easiest way of getting the software is downloading the last official SD image from here:
Download Zynthian "Gorgona" SD-image
This SD-image include all the zynthian software properly configured and ready to use. Plug and play! ;-)
After downloading the SD-image, you have to write it to a SD-card. Depending on your OS you have to choose how to create the SD-card. You need a minimum size of 16GB for the full Gorgona image and 8GB for the Gorgonilla lite image.
Use Etcher https://etcher.io/ (free software works on Mac, Windows or Linux) to flash the image onto the SDcard.
Or do it manually:There is a really good manual for this at this link.
If you prefer, you can build your own SD image following these instructions:
Building the SD Image using the Setup Script