Line 357:
Line 357:
===Test the MIDI===
===Test the MIDI===
−
1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
+
1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
−
2. Boot your Zynthian, select FluidSynth engine, channel #1 and 'FluidR3 GM' bank.
+
2. Boot your Zynthian, select FluidSynth engine, channel #1 and 'FluidR3 GM' bank.
−
3. Push BACK, holding the switch pushed more than 2 seconds. You should get into the 'Admin' screen.
+
3. Push BACK, holding the switch pushed more than 2 seconds. You should get into the 'Admin' screen.
−
4. Select 'MIDI Test' option and push 'SELECT'
+
4. Select 'MIDI Test' option and push 'SELECT'. You should hear the test midi-track: a 'Take Five' version ;-)
−
+
5. Push 'BACK' to stop the playing
−
You should hear the test midi-track: a 'Take Five' version ;-)
If you don't listen nothing, please, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
If you don't listen nothing, please, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].