3,526
edits
Changes
Building a Zynthian Box using an official Kit (view source)
Revision as of 20:53, 16 January 2017
, 20:53, 16 January 2017→Testing the Zynthian Box
Line 345:
Line 345:
+
+
+
+
+
+
etc.
etc.
−===Testing the Audio===
+===Test the Audio===
−===Testing the MIDI===
+1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
+2. Boot your Zynthian. You should be in the initial 'Load Snapshot' screen.
+3. Push BACK twice to get into the 'Admin' screen.
+4. Select 'Audio Test' option and push 'SELECT'
+You should hear the test audio-track: a nice afrocuban stuff ;-)
+If you don't listen nothing, please, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
+===Test the MIDI===
+1. Connect the audio output (RCA or Jack connector) to your amplifier or auto-amplified speakers.
+2. Boot your Zynthian, select FluidSynth engine, channel #1 and 'FluidR3 GM' bank.
+3. Push BACK, holding the switch pushed more than 2 seconds. You should get into the 'Admin' screen.
+4. Select 'MIDI Test' option and push 'SELECT'
+You should hear the test midi-track: a 'Take Five' version ;-)
+If you don't listen nothing, please, check the amplifier, speakers, cabling, gain, volume, etc. If nothing works, you have to [[#Locating_and_Solving_problems|locate and solve the problem(s)]].
=Close the Case=
=Close the Case=