3,526
edits
Changes
Jump to navigation
Jump to search
Building a Zynthian Box using an official Kit (view source)
Revision as of 18:46, 16 January 2017
, 18:46, 16 January 2017→Connect the Jack connectors
Line 278:
Line 278:
'''PHOTO NEEDED HERE''' => Detail HifiBerry audio-out connecter
'''PHOTO NEEDED HERE''' => Detail HifiBerry audio-out connecter
+
+=Test everything=
+
+And that's all. Your Zynthian Box is almost ready to boot. I recommend that you double-check everything. It's easy to make a mistake while assembling the parts or connecting everything.
+
+When you are pretty sure that everything is in its place, it's time to test that everything is working correctly, so:
+
+ 1. insert the SD-card with the zynthian image ready to run
+ 2. plug the mini-usb power cord
+
+These are the stages that you should see while booting:
+
+ 1. Initially, the display must go white
+ 2. After 5-10 seconds, it will show the Zynthian splash screen
+ 3. After 1-2 seconds, it go black
+ 4. If you are using a fresh zynthian image, the stages 2 and 3 will be repeated
+ 5. After 5-10 seconds, the zynthian UI will be shown
+
+If you get the Zynthian UI, congratulations!!! You are really close toget it!!
+If not, bad luck! Probably you made some mistake during the mounting process. You have to [[ locate and solve the problem(s)]].
+
+=Close the Case=
+
+Closing the case can be a little bit tricky. Take your time to see how the cables ...
+
+=Locating and Solving problems=
+
+In this section i will try to give you some tips for locating and solving the problems you may have.
+
+For solving problems, i really recommend to connect a HDMI display to the RBPi. It will give you accurate information during the booting sequence. Also, if you connect a USB keyboard, you can login into the system and get extra information, inspect the logs, etc.
+
+===The display don't go white in the boot stage 1===
+In that case it's very probable you haven't solder correctly the side 26-pin connector. You should double check
=Technical Reference=
=Technical Reference=