3,455
edits
Changes
Jump to navigation
Jump to search
→Step 1: 2in1 board
Line 116:
Line 116:
* 1 * 2in1 PCB (pos. 20)
* 1 * 2in1 PCB (pos. 20)
−[[File:2in1_Parts.jpg|600px]]
+[[File:2in1_kit.jpg|600px]]
==== HowTo: ====
==== HowTo: ====
Line 125:
Line 125:
# Now insert the ICs into the socket. '''Be careful to put them with the notch on the IC towards the hole of the white rectangle showing on the PCB!'''
# Now insert the ICs into the socket. '''Be careful to put them with the notch on the IC towards the hole of the white rectangle showing on the PCB!'''
−[[File:2in1_Solo.jpg|600px]]
+[[File:2in1_ensambled.jpg|600px]]
For the MIDI socket you have to cut off one side of the female/female cable and solder this side to the DIN-socket. Connect the cables to pin 5 (2nd from left) and pin 4 (2nd from right).
For the MIDI socket you have to cut off one side of the female/female cable and solder this side to the DIN-socket. Connect the cables to pin 5 (2nd from left) and pin 4 (2nd from right).