Line 212:
Line 212:
=== 2in1 ===
=== 2in1 ===
−
The 2in1-PCB must be connected using one of the mini-ribbon cables. The 6-pin connector must be located towards the PCB. Pin 1 is on the left bottom (component side up). On the other end of the cable are 1-pin female connectors. They must be connected onto the following pins on the (male) 40-pin-conenctor in the middle of the main-ribbon cable.
+
The 2in1-PCB must be connected using one of the mini ribbon cables. The 6-pin connector must be located towards the PCB. Pin 1 is on the bottom left (component side up). On the other end of the cable there are 1-pin female connectors. They must be connected to the following pins on the (male) 40-pin-conenctor in the middle of the main ribbon cable.
{| class="wikitable"
{| class="wikitable"
Line 233:
Line 233:
[[File:Cable-schema-2in1.png|600px]]
[[File:Cable-schema-2in1.png|600px]]
−
Next connect the DIN socket (MIDI) onto the 2in1-PCB. The connector on the PCB is the 2-pin one located on the upper right of the PCB.
+
Next connect the DIN socket (MIDI) to the 2in1-PCB. The connector on the PCB is the 2-pin one located in the upper right corner of the PCB.
{| class="wikitable"
{| class="wikitable"