Line 5:
Line 5:
===Where can i buy a Zynthian Kit?===
===Where can i buy a Zynthian Kit?===
Currently you can buy the official Zynthian Kits in the [http://shop.zynthian.org Zynthian Shop].
Currently you can buy the official Zynthian Kits in the [http://shop.zynthian.org Zynthian Shop].
+
+
=== How do I edit entries in the wiki? ===
+
You need to be able to login to the wiki with a username. Simply register...
=== I just wrote my 16/32/64 GB SD card with a Zynthian image, but from Zynthian's console i only see a part of SD's total space and i've no free space left in the partition. How can i make available all the space on my SD Card? ===
=== I just wrote my 16/32/64 GB SD card with a Zynthian image, but from Zynthian's console i only see a part of SD's total space and i've no free space left in the partition. How can i make available all the space on my SD Card? ===
−
'''UPDATE: From 2016-12-23, the Gorgona SD image solved this problem. Latest SD images will auto-expand the partition on the first boot, so you shouldn't have this problem never more, but if you have it ...'''
+
'''UPDATE:''' From 2016-12-23, the Gorgona SD image solved this problem. Latest SD images will auto-expand the partition on the first boot, so you shouldn't have this problem never more, but if you have it ...
−
After writing the Zynthian image in the SD card, you have to "expand" the partition to fill all the available space.
−
Procedure:
+
After writing the Zynthian image in the SD card, you have to "expand" the partition to fill all the available space. Follow these steps:
−
+ login into Zynthian by SSH
+
+ login into your zynthian box using ssh
+ execute "df" command to see the size of your partition and the available space
+ execute "df" command to see the size of your partition and the available space
−
+ run "sudo raspi-config" and select the first option to expand your partition
+
+ run "raspi-config" and select the first option to expand your partition
−
+ reboot Zynthian
+
+ reboot your zynthian box
−
+ login again and execute "df" command to see size of your partition and the available space
+
+ login again and execute "df" command to see size of your partition and the available space. You should see the difference ;-)
−
−
You should see the difference ;-)
'''Important:''' If you don't expand your partition, you will have problems when updating zynthian software or library, as you will run out of space.
'''Important:''' If you don't expand your partition, you will have problems when updating zynthian software or library, as you will run out of space.
−
−
−
=== Can i play a MIDI track with Zynthian as a multi instrument expander (different instruments on different channels)? If I have such a setup: how can I store it? ===
−
−
You can create such a setup by using the channel list and configuring different presets on each channel. This will work with the next Synth Engines:
−
−
+ ZynAddSubFX
−
+ LinuxSampler
−
+ FluidSynth
−
−
setBfree tries to emulate the original Hammond B3 configuration. It has a fixed setup of 2 manuals (upper and lower) and pedals, arranged in channels 1, 2 and 3.
−
−
While using MOD-UI, the channel list doesn't appears, but you can setup a MIDI splitter/router inside Carla and configure different plugins/effects in each channel or create more complex setups. No limits (well, CPU ;-).
−
−
Remember that currently you can only work with one engine at a time, but using MOD-UI you can load all the engines as plugins, so you create complex multi-engine setups.
−
−
=== I try to put some GIG files inside the '''zynthian-my-data/soundfonts''' folder, but Zynthian GUI don't show my files. What am i doing wrong? ===
−
−
The files dropped directly inside "gig" directory wont be shown. You must create some subfolder (category) inside the gig folder. The same is true for SFZs soundfonts.
−
−
=== How do I edit entries in the wiki? ===
−
You need to be able to login to the wiki with a username:
−
Simply register . .