99
edits
Changes
Jump to navigation
Jump to search
Line 1,298:
Line 1,298: − − + − * Press Shift button to verify knobs are sending relative CC, change with blue encoder if needed.+ − * Press Shift button to verify <> buttons are sending MIDI CC, change with white encoder if desired. Set to Octave ± if this behavior is preferred.+ − * Optionally configure MIDI channel as described [https://teenage.engineering/guides/op-1/original/song-rendering-and-connectivity#13.4 here].+
Supported plug & play MIDI controllers (view source)
Revision as of 10:25, 22 February 2026
, 22 February→Configuring the OP-1
===Configuring the OP-1===
===Configuring the OP-1===
To enable the driver integration, on the OP-1:
To enable the driver integration, on the OP-1:
* Press Shift + COM Button
* Press Shift + COM Button
* Select CTRL Mode (Press Button T2)
* Select CTRL Mode (Press Button T2)
* Notes:
* Additional steps for the first time:
** Press Shift button to verify knobs are sending relative CC, change with blue encoder if needed.
** Press Shift button to verify <> buttons are sending MIDI CC, change with white encoder if desired. Set to Octave ± if this behavior is preferred.
** Optionally configure MIDI channel as described [https://teenage.engineering/guides/op-1/original/song-rendering-and-connectivity#13.4 here].
To switch to regular OP-1 mode
To switch to regular OP-1 mode