12
edits
Changes
Jump to navigation
Jump to search
Line 141:
Line 141: + + + + + +
Zynthian UI User's Guide - Oram (view source)
Revision as of 08:10, 13 December 2025
, 08:10, 13 December 2025Document how to use PC from controller to change zs3
With mapped to port set the learnt settings will apply only to the specific USB Configuration in place at the time of learning. So if you add a USB hub to the rig the ZS3 sub-snapshots won't act.
With mapped to port set the learnt settings will apply only to the specific USB Configuration in place at the time of learning. So if you add a USB hub to the rig the ZS3 sub-snapshots won't act.
Turning this off will allow control simply by the MIDI message only.
Turning this off will allow control simply by the MIDI message only.
When in the ZS3 screen, you can save the current (sub)state to ZS3 by sending a Program Change from any MIDI controller.
BUT In order to be able to change ZS3 by Program Change, you have to tick the box at
'''Interface->MIDI-options->Program Change ZS3 (Program Change for SubSnapShots)'''
ZS3s include:
ZS3s include: