60
edits
Changes
Jump to navigation
Jump to search
mLine 279:
Line 279: − + − +
Building a Zynthian Box using an official Kit v2 (view source)
Revision as of 07:23, 26 June 2025
, 26 June→Building the MIDI-IN/OUT/THRU connectors
* JST Red (4) => pin 4 of MIDI connector
* JST Red (4) => pin 4 of MIDI connector
If you want (i strongly recommend you do it!), you can protect the contacts using heat-shrink sleeve (the red sleeve pieces in the photo). In that case, remember to insert the sleeve pieces before soldering ;-)
If you want (I strongly recommend you do it!), you can protect the contacts using heat-shrink sleeve (the red sleeve pieces in the photo). In that case, remember to insert the sleeve pieces before soldering ;-)
[[File:IMG_1276.JPG|600px]]
[[File:IMG_1276.JPG|600px]]
Depending of your case version, you will need to build 2 or 3 MIDI connectors.
Depending on your case version, you will need to build 2 or 3 MIDI connectors.
===Building the JACK Audio-Out connectors===
===Building the JACK Audio-Out connectors===