3,509
edits
Changes
Jump to navigation
Jump to search
→Plug the flat ribbon cable into the control board
Line 440:
Line 440:
<br clear=all>
[[File:capture000142_fixed_wiki.jpg|600px|right]]
[[File:capture000142_fixed_wiki.jpg|600px|right]]
−'''1.''' Look for the control flat ribbon cable in the wiring bag. It's grey with blue tips, 15cm long and 1cm wide.
+'''1.''' Look for the control flat ribbon cable in the wiring bag. It's 15cm long and 1cm wide. Contacts are crossed, with one side faced up and the other side faced down.
<br clear=all>
<br clear=all>
Line 448:
Line 448:
'''2.''' Carefully, using 2 fingers, one on each hand, pull the control board's FPC connector tongue until it's totally open.
'''2.''' Carefully, using 2 fingers, one on each hand, pull the control board's FPC connector tongue until it's totally open.
+
+<br clear=all>
{{NoteBox| Please, note that the white JST connector shown on the pictures at left may not be soldered in you control board. Don't worry about it as it's not need it for normal operation. }}
{{NoteBox| Please, note that the white JST connector shown on the pictures at left may not be soldered in you control board. Don't worry about it as it's not need it for normal operation. }}
−[[File:capture000086_fixed_wiki.jpg|600px|right]]
[[File:capture000086_fixed_wiki.jpg|600px|right]]
−'''3.''' Insert the ribbon cable into the FPC connector. It must be inserted straight, with the blue side facing down. '''All flat cables in the V5 kit are reversible, so you can take any of the 2 caps''', while '''taking care of placing the blue side facing down'''.
+'''3.''' Insert the ribbon cable into the FPC connector. It must be inserted straight, with the contacts side facing up. '''All flat cables in the V5 kit are reversible, so you can take any of the 2 caps''', while '''taking care of placing the contacts side facing up'''.
<br clear=all>
<br clear=all>