512
edits
Changes
Jump to navigation
Jump to search
→First Boot: Update network and password
Line 50:
Line 50:
* Insert the microSD card into the Raspberry Pi
* Insert the microSD card into the Raspberry Pi
* Connect the Raspberry Pi to the computer keyboard, mouse and HDMI monitor
* Connect the Raspberry Pi to the computer keyboard, mouse and HDMI monitor
−* Connnect the headphones or sound system to the Raspberry Pi 3.5mm audio output
+* Connnect the headphones or sound system to the Raspberry Pi 3.5mm audio output or connect the USB soundcard / hat
* Connect power to the Raspberry Pi
* Connect power to the Raspberry Pi
* ZynthianOS starts and should display a message that it is performing some initialisation which may take a few minutes - be patient and wait for this to complete
* ZynthianOS starts and should display a message that it is performing some initialisation which may take a few minutes - be patient and wait for this to complete
Line 63:
Line 63:
==== Connect via Web Browser ====
==== Connect via Web Browser ====
Now it's time to connect to Zynthian's built-in web interface (known as WebConf). Open your web browser of choice then:
Now it's time to connect to Zynthian's built-in web interface (known as WebConf). Open your web browser of choice then:
−* On MacOS, go to http://zynthian.local to access the Zynthian WebConf Tool
+* Go to http://zynthian.local to access the Zynthian WebConf Tool
− password = raspberry
+ password = opensynth
−* On Windows, first [https://wiki.zynthian.org/index.php/Finding_your_IP_address find the IP address of the Raspberry Pi], then type the IP address on the web browser to access the Zynthian WebConf Tool.
+* If this fails, first [https://wiki.zynthian.org/index.php/Finding_your_IP_address find the IP address of the Raspberry Pi], then type the IP address on the web browser to access the Zynthian WebConf Tool.
−There are tools available to activate the bonjour mechanism to allow using the name which is a much more flexible option.
+There maybe tools available on your OS to activate the mDNS (aka bonjour) mechanism to allow using the name which is a much more flexible option.
==== Troubleshooting ====
==== Troubleshooting ====
Line 75:
Line 75:
==== Configure Internet ====
==== Configure Internet ====
−* If you are connected via an ethernet switch, connect the switch to your internet box
+* If you are connected via an ethernet switch, connect the switch to your Internet box
* If you are directly connected via an ethernet cable, configure the Wifi on the WebConf page:
* If you are directly connected via an ethernet cable, configure the Wifi on the WebConf page:
[http://zynthian.local/sys-wifi System / WIFI] / Add Network
[http://zynthian.local/sys-wifi System / WIFI] / Add Network
Mode = ON
Mode = ON
</blockquote>
</blockquote>
+
== Post-Installation Steps ==
== Post-Installation Steps ==