Changes

Look in the “custom” folder in the zynthian-sys GitHub repository. Inside, there is a subfolder called “display”, and inside that is a subfolder for every device that requires customized config files:

Look in the “custom” folder in the zynthian-sys GitHub repository. Inside, there is a subfolder called “display”, and inside that is a subfolder for every device that requires customized config files:

'''zynthian-sys''' - System config files for Zynthian. Adjustments and adds.

'''zynthian-sys''' - System config files for Zynthian. Adjustments and adds. The device’s subfolder name should match the name used in the webconf tool.

 

The device’s subfolder name should match the name used in the webconf tool.

As you see, currently there are only 2 customized devices (the 2 officially supported displays), but more displays should be added, specially for getting touch support out-the-box.

As you see, currently there are only 2 customized devices (the 2 officially supported displays), but more displays should be added, specially for getting touch support out-the-box.

1.) Copy the files you have customized in the next 3 places:

1.) Copy the files you have customized in the next 3 places:

/etc

+ /etc

/boot

+ /boot/firmware/overlays

/zynthian/config/zynthian_custom_config.sh

to a subfolder inside “/zynthian/zynthian-sys/custom”, with the same name used by the webconf tool. You must re-create the directory structure inside the subfolder. Take a look at the existing examples.

to a subfolder inside “/zynthian/zynthian-sys/custom”, with the same name used by the webconf tool. You must re-create the directory structure inside the subfolder. Take a look at the existing examples.