Changes

[[File:build51_rpi5.jpg|600px|right]]

[[File:build51_rpi5.jpg|600px|right]]

'''2.''' Look for the RPi4 compute module in the "Accessories" case.

'''2.''' Look for the RPi5 in the "Accessories" case.

<br clear=all>

<br clear=all>

[[File:build51_rpi5_display_cable_plugged_02.jpg|600px|right]]

[[File:build51_rpi5_display_cable_plugged_02.jpg|600px|right]]

'''3.''' Open the RPi4's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, with the blue side facing out. '''All flat cables in the V5 kit are reversible, so you can take any of the 2 caps''', while taking care of placing the blue side facing out. When the cable is tightly inserted, close the connector by pushing the tongue with 2 fingers, one of each hand. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.

'''3.''' Open the RPi5's DSI connector by softly pulling both sides of the tiny black tongue at once. When it's totally open, push the ribbon cable inside, straight, with the blue side facing out. '''All flat cables in the V5 kit are reversible, so you can take any of the 2 caps''', while taking care of placing the blue side facing out. When the cable is tightly inserted, close the connector by pushing the tongue with 2 fingers, one of each hand. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.

<br clear=all>

<br clear=all>