Changes

[[File:build51_join_parts_close_01.jpg|600px|right]]

[[File:build51_join_parts_close_01.jpg|600px|right]]

'''1.''' Fit the upper part into the lower part forming a 90º angle, as shown in the picture. Note the way the display flat cable naturally bends. You don't need to force this bending.

'''1.''' Without moving the parts from the last position, you are ready to close the case. Now you are really close to finish the assembling process!

<br clear=all>

<br clear=all>

[[File:build51_join_parts_close_02.jpg|600px|right]]

[[File:build51_join_parts_close_02.jpg|600px|right]]

'''3.''' Close the case slowly, taking care that the cables are not being trapped.

'''2.''' Close the case slowly, taking care that the cables are not being trapped. Probably you would need to ''help'' the control flat cable to get into the case while closing it.

<br clear=all>

<br clear=all>

[[File:build51_join_parts_close_03.jpg|600px|right]]

[[File:build51_join_parts_close_03.jpg|600px|right]]

'''4.''' '''Before securing the case top and the knobs''', it's a good time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]''' and check everything is working OK.  

'''3.''' '''Before securing the case top and inserting the knobs''', it's a good time to '''[[Zynthian Software|burn a SD-card with the latest zynthian software image]]''' and check everything is working OK.  

Please, use a good quality SD-card and follow the [[Zynthian Software|instructions]] carefully.

Please, use a good quality SD-card and follow the [[Zynthian Software|instructions]] carefully.

First boot could take some time. Don't be impatient and wait until you see the splash screen with the logo. If the display remains black after 1 minute, please, re-check the [[Zynthian Software|instructions]] and re-burn the SD-card again. If this still don't work, try with a different SD-card before reporting in the [https://discourse.zynthian.org forum]. For solving SD-card issues, it could be useful to [https://raspberrytips.com/green-and-red-light-on-raspberry-pi check the RPi4 status LEDs].

First boot could take some time. Don't be impatient and wait until you see the splash screen with the logo. If the display remains black after 1 minute, please, re-check the [[Zynthian Software|instructions]] and re-burn the SD-card again. If this still don't work, try with a different SD-card before reporting in the [https://discourse.zynthian.org forum]. For solving SD-card issues, it could be useful to [https://raspberrytips.com/green-and-red-light-on-raspberry-pi check the RPi5 status LEDs].

Once you see the splash screen, it could take some minutes until the system is ready. You deserve a beer, or at less some some tea or coffee. When the first-boot process finishes, the zynthian will reboot and you will be in the main menu, ready to play.

Once you see the splash screen, it could take some minutes until the system is ready. You deserve a beer, or at less some some tea or coffee. When the first-boot process finishes, the zynthian will reboot and you will be in the main menu, ready to play.

[[File:capture000125_fixed_wiki.jpg|600px|right]]

[[File:capture000125_fixed_wiki.jpg|600px|right]]

'''5.''' If everything worked fine and your zynthian booted, finish the task before start exploring your new zynthian V5. Take the remaining 6 x ISO7380 M3 screws and secure the case, 3 on each side. Tighten enough, but not too much.

'''5.''' If everything worked fine and your zynthian is alive, please, finish the task before start exploring your new zynthian V5.1. Take the remaining 6 x ISO7380 M3 screws and secure the case, 3 on each side. Tighten enough, but not too much.

<br clear=all>

<br clear=all>