Changes

Jump to navigation Jump to search
Line 529: Line 529:  
[[File:build51_join_parts_display_01.jpg|600px|right]]
 
[[File:build51_join_parts_display_01.jpg|600px|right]]
   −
'''1.''' Place the two parts one aside the other, forming 90º angle, as shown in the picture.
+
'''1.''' Take the cardboard box labeled as V5, which contained the aluminum case. We will use it as a mounting tool in this step. Place it at right side of the zynthian's bottom part forming a 90º angle, as shown in the picture.
    
<br clear=all>
 
<br clear=all>
Line 535: Line 535:  
[[File:build51_join_parts_display_02.jpg|600px|right]]
 
[[File:build51_join_parts_display_02.jpg|600px|right]]
   −
'''2.''' Using two fingers, one on each hand, softly pull the display's FPC tongue until it's open. Insert the flat ribbon cable coming from the RPi4 into the bottom's part. Do it straight, without bending or twisting it in any way, so the blue side is face down.
+
'''2.''' Place over the box the zynthian's top part, with the display surface touching the cardboard and the display connector at left. Just like shown in the picture.
    
<br clear=all>
 
<br clear=all>
Line 541: Line 541:  
[[File:build51_join_parts_display_03.jpg|600px|right]]
 
[[File:build51_join_parts_display_03.jpg|600px|right]]
   −
'''3.''' When it's totally inserted, softly push the tongue using 2 fingers, one on each hand, until it's totally closed. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
+
'''3.''' Using two fingers, one on each hand, softly pull the display's connector tongue until it's open. Insert the flat ribbon cable coming from the RPi5 into it so the blue side is face down.
    
<br clear=all>
 
<br clear=all>
Line 547: Line 547:  
[[File:build51_join_parts_display_04.jpg|600px|right]]
 
[[File:build51_join_parts_display_04.jpg|600px|right]]
   −
'''3.''' When it's totally inserted, softly push the tongue using 2 fingers, one on each hand, until it's totally closed. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
+
'''4.''' When it's totally inserted, softly push the tongue using 2 fingers, one on each hand, until it's totally closed. Pay attention to ensure the cable does not move out of the connector. If it's not well inserted or not straight, repeat the operation until it's OK.
    
<br clear=all>
 
<br clear=all>

Navigation menu