63
edits
Changes
Jump to navigation
Jump to search
Line 332:
Line 332: − +
→Assembling Zynthian MINI V2 into 3d printable enclosure
;Legs:These are small legs that are attached (glued) to the bottom part. They are designed to be a separate part from bottom part so that bottom part can be placed to printing bed and sliced without too much additional support. There is one stl file for one leg so you will need to print four of these.
;Legs:These are small legs that are attached (glued) to the bottom part. They are designed to be a separate part from bottom part so that bottom part can be placed to printing bed and sliced without too much additional support. There is one stl file for one leg so you will need to print four of these.
You can either print this case yourself if you have a printer or give these 4 files to some of your friends that have it and point them to instructions here. Also you can request somebody to print this for you on [https://www.thingiverse.com/thing:6606399 thingiverse].
You can either print this case yourself if you have a printer or give these 4 files to some of your friends that have it and point them to instructions here.
=== 3D printing instructions ===
=== 3D printing instructions ===