Changes

[[File:Zynthian_ui_midi_cc_learn_02.png|400px|right]]

[[File:Zynthian_ui_midi_cc_learn_02.png|400px|right]]

You can map any parameter in the Zynthian UI to a CC knob / slider on your external MIDI controller. It is intended to extend this feature to other MIDI messages but currently only CC messages are supported. Until then, MIDI-filter rules can be used instead.

You can map any parameter in the Zynthian UI to a CC knob / slider on your external MIDI controller. It is intended to extend this feature to other MIDI messages but currently only CC messages are supported. Until then, MIDI-filter rules can be used instead.

===Midi learn using the encoders===

===Midi learn using the encoders===

Learning a MIDI-CC is quite easy:

Learning a MIDI-CC is quite easy:

'''1.''' From the Control View, short press LEARN. The CC MIDI-learn view is shown. It’s identical to the Control screen except that the controllers show a '''yellow''' “??”.

:'''1.''' From the Control View, short press LEARN. The CC MIDI-learn view is shown. It’s identical to the Control screen except that the controllers show a '''yellow''' “??”.

'''2.''' Move a Zynthian controller. The “??” changes to '''green'''. The other three will go back to normal state.

:'''2.''' Move a Zynthian controller. The “??” changes to '''green'''. The other three will go back to normal state.

'''3.''' Finally, move a knob / fader in your MIDI keyboard / controller and the binding is done. The new CC number should appear at the bottom of the learned controller, replacing the "??".

:'''3.''' Finally, move a knob / fader in your MIDI keyboard / controller and the binding is done. The new CC number should appear at the bottom of the learned controller, replacing the "??".

To unbind a MIDI learned CC binding:

To unlearn a MIDI CC binding:

'''1.''' From the Control View, short press SNAPSHOT. The CC MIDI-learn view is shown.

:'''1.''' From the Control View, short press SNAPSHOT. The CC MIDI-learn view is shown.

'''2.''' Bold press LEARN to unlearn all controls or adjust a control to select it for MIDI learn

 

'''3.''' Bold press LEARN to unlearn the selected controller

:'''2.''' Bold press LEARN to unlearn all controls or adjust a control to select it for MIDI learn

 

:'''3.''' Bold press LEARN to unlearn the selected controller

=== MIDI learn with a touchscreen or mouse ===

=== MIDI learn with a touchscreen or mouse ===

MIDI learn with a touchscreen or mouse is very similar, it is performed by touching/clicking then swiping right on a control to show the '''green''' "??" then sending the MIDI CC.

MIDI learn with a touchscreen or mouse is very similar, it is performed by:

MIDI unlearn with a touchscreen is performed by swiping left on a control then selecting the option from the menu to unlearn the control or all controls.

 

:'''1.''' touching/clicking then swiping '''right''' on a parameter to show the '''green''' "??"  

 

:'''2.''' touch the control on your midi device to send the MIDI CC

 

MIDI unlearn with a touchscreen is performed by:

 

:'''1.''' touching/clicking then swiping '''left''' on a control  

 

:'''2.''' select the option from the menu to unlearn the control or all controls.

Unlearn operations require confirmation.

Unlearn operations require confirmation.

<br clear=all>

<br clear=all>

==== ZS3 (SubSnapShots): MIDI Program Change Learning ====

=== ZS3 (SubSnapShots): MIDI Program Change Learning ===

[[File:Zynthian_ui_midi_zs3_learn.png|400px|right]]

[[File:Zynthian_ui_midi_zs3_learn.png|400px|right]]

===Creating a SubSnapShot===

===Creating a SubSnapShot===

#Ensure "Program Change ZS3" is enabled in the admin menu.

:'''1.''' Ensure "Program Change ZS3" is enabled in the admin menu.

#From the Control View, short press SNAPSHOT to enter MIDI control learn mode then short press SNAPSHOT again. You will see the current list of ZS3s (initially empty) and a message: “Waiting for Program Change…”

 

#Send a “MIDI Program Change” from your keyboard / controller and the ZS3 will be stored in memory, associated with the Program Number you pushed on your keyboard / controller. Alternatively select "Save as new ZS3" from the menu to save ZS3 without MIDI Program Change assigned.

:'''2.''' From the Control View, short press SNAPSHOT to enter MIDI control learn mode then short press SNAPSHOT again. You will see the current list of ZS3s (initially empty) and a message: “Waiting for Program Change…”

 

:'''3.''' Send a “MIDI Program Change” from your keyboard / controller and the ZS3 will be stored in memory, associated with the Program Number you pushed on your keyboard / controller. Alternatively select "Save as new ZS3" from the menu to save ZS3 without MIDI Program Change assigned.

===Recalling a SubSnapShot===

===Recalling a SubSnapShot===