Line 362:
Line 362:
6. screws for brass heat set inserts (quanity 8) - M2.5, 6mm - can be purchased [https://www.aliexpress.com/item/4001248931159.html here]
6. screws for brass heat set inserts (quanity 8) - M2.5, 6mm - can be purchased [https://www.aliexpress.com/item/4001248931159.html here]
7. 5" DSI screen and its screws - can be purchased [https://github.com/sstojos/zynthian-mini/wiki/V2-Components-required here]
7. 5" DSI screen and its screws - can be purchased [https://github.com/sstojos/zynthian-mini/wiki/V2-Components-required here]
−
8. zynthian MINI V2 PCB - check instructions above how to assemble it
+
8. zynthian MINI V2 PCB - check instructions above how to assemble it
−
9. enncoder caps (quantity 4) and nuts - check PCB components required above where to buy it
+
9. enncoder caps (quantity 4) and nuts - check PCB components required above where to buy it
10. Neutrik 1/4 stereo connector cap - can be purchased [https://github.com/sstojos/zynthian-mini/wiki/V2-Components-requiredhere]
10. Neutrik 1/4 stereo connector cap - can be purchased [https://github.com/sstojos/zynthian-mini/wiki/V2-Components-requiredhere]
−
11. raspberry pi 4 with heatsink
+
11. raspberry pi 4 with heatsink
−
12. raspbery pi posts and their screws
+
12. raspbery pi posts and their screws - their size depend on heatsink - the standard zynthian MINI V2 PCB build recommends two spacers connector which is 16mm long so that there is enough space for raspberry pi to cool - therefore if heatsink is 7mm then raspberry pi posts need to be 9mm (7mm+9mm=16mm)
−
*their size depend on heatsink - the standard zynthian MINI V2 PCB build recommends two spacers connector which is 16mm long so that there is enough space for raspberry pi to cool - therefore if heatsink is 7mm then raspberry pi posts need to be 9mm (7mm+9mm=16mm)
+
13. HAT posts (quantity 4) - 11mm standard.
−
13. HAT posts (quantity 4) - 11mm standard.
14. Tools required - soldering iron for inserting heat set inserts and small phillips screw driver
14. Tools required - soldering iron for inserting heat set inserts and small phillips screw driver