Changes

====The User mode====

====The User mode====

This mode is a special mode, with no other purpose that letting you all the available controls for MIDI learning. Only PC 0-7 and 12,13 are NOT available (as they are used for changing modes and Zynthian's shortcuts). You can switch to this mode by pressing '''PROG CHANGE''':<code>PAD 5 B</code>. You should see <code>Zynthian USER</code> in the display of the MPK.

This is a special mode, with no other purpose that letting you all the available controls for '''MIDI learning'''. Only PC 0-7 and 12,13 are NOT available (as they are used for changing modes and Zynthian's shortcuts). You can switch to this mode by pressing '''PROG CHANGE''':<code>PAD 5 B</code>. You should see <code>Zynthian USER</code> in the display of the MPK.

These is the available configuration:

This is the available configuration:

* PADs channel is the assigned in Config mode (see below).

* PADs channel is the assigned in Config mode (see below).

* PAD notes are the assigned in NotePad.

* PAD notes are the assigned in NotePad.

* PAD CCs are in range [40-47] for bank A, and [48-55] for bank B.

* PAD CCs are in range [40-47] for bank A, and [48-55] for bank B.

* PAD PCs 8,9,10,11 and 14,15 (all in bank B) are available.

* PC PADs 1, 2, 3, 4, 7 and 8 (all in bank B) are available.

* All Knobs are available, and their CCs goes from 56 to 63.

* All Knobs are available, and their CCs goes from 56 to 63.

* Joystick Y channel is mapped as pitchbend.

* Joystick Y channel is mapped as pitchbend.