113
edits
Changes
Jump to navigation
Jump to search
Line 240:
Line 240: − + − + − + − + + + + + + + + + + + + + + + + + + +
Supported plug & play MIDI controllers (view source)
Revision as of 13:31, 19 March 2024
, 13:31, 19 March 2024→The Device mode
</p>
</p>
* Use <code>PAD 1-3</code> and <code>PAD 6</code> of bank A to '''move''' around the user interface (up, down, left and right, as shown in the diagram). You can also use the joystick for this.
* In '''bank A''':
* '''Cancel''' or '''go back''' with <code>PAD 5</code>.
** Use <code>PAD 1-3</code> and <code>PAD 6</code> to '''move''' around the user interface (up, down, left and right, as shown in the diagram). You can also use the joystick for this.
* '''Accept''' of '''select''' an item, using <code>PAD 7</code>.
** '''Cancel''' or '''go back''' with <code>PAD 5</code>.
* Launch the '''options''' menu, or the '''admin''' menu, by a short press in <code>PAD 8</code>. Each press will toggle between these two screens. With a ''long press'', it will '''shutdown''' the system (a confirm dialog will appear).
** '''Accept''' of '''select''' an item, using <code>PAD 7</code>.
** Launch the '''options''' menu, or the '''admin''' menu, by a short press in <code>PAD 8</code>. Each press will toggle between these two screens. With a ''long press'', it will '''shutdown''' the system (a confirm dialog will appear).
** Open the '''controls''' or '''preset''' screen of a chain, doing a short press in <code>PAD 4</code>. In Zynpad, a ''long press'' of <code>PAD 4/7</code> will open the '''pattern editor''' for the selected sequence.
* In '''bank B''':
** Upper row of PADs is used for '''transport buttons''', just like the mixer mode:
*** <code>PAD 5</code>: stop all sounds (panic button).
*** <code>PAD 6</code>: toggle audio record.
*** <code>PAD 7</code>: stop audio.
*** <code>PAD 8</code>: toggle audio playback.
** Lower row is used as V5 Knob '''press buttons'''. The mapping is from <code>PAD 1</code> to <code>PAD 4</code>, which are used as Knob#1 to Knob#4 press buttons. These buttons are available in CC and PC mode. This is mainly needed for MIDI learning features, where a CC message would establish the control's MIDI learn. CC is needed when a bold/long press is required.
This mode also maps the V5 Knobs to <code>K1</code>, <code>K5</code>, <code>K2</code>, <code>K6</code>, in that order.
Knob <code>K3</code> is used to adjust '''the tempo'''. When rotated, the Zynthian tempo screen will be shown briefly. This tempo setting is synchronized with the MPK.
<p style="margin: 1em 0 1.5em; padding: 1em; background-color: #fef6e7; display:table-cell">
'''NOTE''': The MPK resolution is 1BPM, but Zynthian is 0.1BPM; take this into account to avoid drifting.
</p>
<br clear=all>
<br clear=all>