113
edits
Changes
Jump to navigation
Jump to search
Supported plug & play MIDI controllers (view source)
Revision as of 16:18, 1 March 2024
, 16:18, 1 March 2024→The Mixpad mode
Line 21:
Line 21:
* Tap a pad to '''start/stop a sequence'''. The pad LED will show its status as follows (pad color will always match the sequence color):
−** Dim solid: Stopped sequence without content (no notes in patterns).
−** Bright solid: Stopped sequence with content.
−** Blinking slow: Playing sequence.
−** Blinking fast: Recording sequence.
−** Pulsing: Syncing to play/stop.
This is the default mode, selected automatically on start. You can also change to it pressing <code>SHIFT</code> + <code>VOLUME</code> or <code>SHIFT</code> + <code>PAN</code>. In this mode you can perform the following actions:
This is the default mode, selected automatically on start. You can also change to it pressing <code>SHIFT</code> + <code>VOLUME</code> or <code>SHIFT</code> + <code>PAN</code>. In this mode you can perform the following actions:
−* '''Start/stop a sequence''', pressing the corresponding pad. It will blink when playing, and pulsate when starting/stopping/syncing.
+* Tap a pad to '''start/stop a sequence'''. The pad LED will show its status as follows (pad color will always match the sequence color):
+** Dim solid: Stopped sequence without content (no notes in patterns).
+** Bright solid: Stopped sequence with content.
+** Blinking slow: Playing sequence.
+** Blinking fast: Recording sequence.
+** Pulsing: Syncing to play/stop.
* Change controller's bank. There are '''two banks''' (1 and 2), which are used to handle up to 16 chains (with the eight track buttons/knobs). Bank 1 is for chains 1 to 8 and bank 2 manage chains 9 to 16. To show current selected bank, press and hold <code>SHIFT</code>. One of the track buttons <code>LEFT arrow</code> or <code>RIGHT arrow</code> will light up in red, <code>LEFT arrow</code> is bank 1 and <code>RIGHT arrow</code> is bank 2. You can press one of these buttons while holding <code>SHIFT</code> to change the bank.
* Change controller's bank. There are '''two banks''' (1 and 2), which are used to handle up to 16 chains (with the eight track buttons/knobs). Bank 1 is for chains 1 to 8 and bank 2 manage chains 9 to 16. To show current selected bank, press and hold <code>SHIFT</code>. One of the track buttons <code>LEFT arrow</code> or <code>RIGHT arrow</code> will light up in red, <code>LEFT arrow</code> is bank 1 and <code>RIGHT arrow</code> is bank 2. You can press one of these buttons while holding <code>SHIFT</code> to change the bank.
Line 29:
Line 34:
** <code>MUTE</code>, used to mute the corresponding chain.
** <code>MUTE</code>, used to mute the corresponding chain.
** <code>SOLO</code>, used to enable solo in the corresponding chain.
** <code>SOLO</code>, used to enable solo in the corresponding chain.
+
+* '''Mute main chain''', pressing <code>SHIFT</code> + <code>PLAY</code>.
* '''Change current scene''' using the track buttons. You need first to select that function by pressing <code>SHIFT</code> + <code>REC ARM</code> button. This function is affected by bank selection, so you can change up to 16 scenes. When selecting a new scene, the ZynPad will be shown.
* '''Change current scene''' using the track buttons. You need first to select that function by pressing <code>SHIFT</code> + <code>REC ARM</code> button. This function is affected by bank selection, so you can change up to 16 scenes. When selecting a new scene, the ZynPad will be shown.
Line 38:
Line 45:
* Use <code>SHIFT</code> + <code>KNOB k1</code> to change volume or balance for main chain (what changes is selected by the current KNOB CTRL function).
* Use <code>SHIFT</code> + <code>KNOB k1</code> to change volume or balance for main chain (what changes is selected by the current KNOB CTRL function).
−* Press <code>SHIFT</code> + <code>STOP ALL CLIPS</code> for a 'panic' stop, which stops all sequences, audio and midi playback.
+* Press <code>SHIFT</code> + <code>STOP ALL CLIPS</code> for a ''''panic' stop''', which stops all sequences, audio and midi playback.
* '''Toggle audio playback''' with <code>PLAY/PAUSE</code> button. If Zynthian's ALT mode is active, it will '''toggle MIDI playback'''.
* '''Toggle audio playback''' with <code>PLAY/PAUSE</code> button. If Zynthian's ALT mode is active, it will '''toggle MIDI playback'''.
* '''Toggle audio record''' with <code>SHIFT</code> + <code>RECORD</code> button. If Zynthian's ALT mode is active, it will '''toggle MIDI recording'''.
* '''Toggle audio record''' with <code>SHIFT</code> + <code>RECORD</code> button. If Zynthian's ALT mode is active, it will '''toggle MIDI recording'''.
−* '''Stop all sequences''' of current scene (but not audio/midi playback or recording), doing a ''short'' press on <code>STOP ALL CLIPS</code> button; ''bold'' press to stop all sequences on all scenes.
* '''Stop all sequences''' of current scene (but not audio/midi playback or recording), doing a ''short'' press on <code>STOP ALL CLIPS</code> button; ''bold'' press to stop all sequences on all scenes.