108
edits
Changes
Jump to navigation
Jump to search
Line 31:
Line 31: − + + + − + Line 44:
Line 46: − + + + + +
Supported plug & play MIDI controllers (view source)
Revision as of 20:59, 16 January 2024
, 16 January→Akai APC Key25 MK2
* Use knobs to modify '''chains' volume or balance'''. The value modified is given by current KNOB CTRL selected: <code>VOLUME</code> or <code>PAN</code> (for balance). To change the function, press <code>SHIFT</code> + <code>VOLUME</code> or <code>SHIFT</code> + <code>PAN</code>. The knobs are also affected by current controller's bank.
* Use knobs to modify '''chains' volume or balance'''. The value modified is given by current KNOB CTRL selected: <code>VOLUME</code> or <code>PAN</code> (for balance). To change the function, press <code>SHIFT</code> + <code>VOLUME</code> or <code>SHIFT</code> + <code>PAN</code>. The knobs are also affected by current controller's bank.
* Use <code>SHIFT</code> + <code>KNOB k1</code> to change volume or balance for main chain (will change the current KNOB CTRL function).
* Use <code>SHIFT</code> + <code>KNOB k1</code> to change volume or balance for main chain (will change the current KNOB CTRL function).
* Press <code>SHIFT</code> + <code>STOP ALL CLIPS</code> to perform the selected track's function (MUTE or SOLO) on main chain.
* '''Toggle audio playback''' with <code>PLAY/PAUSE</code> button. If Zynthian's Alt mode is active, it will '''toggle MIDI playback'''.
* '''Toggle audio playback''' with <code>PLAY/PAUSE</code> button. If Zynthian's Alt mode is active, it will '''toggle MIDI playback'''.
* '''Toggle audio record''' with <code>RECORD</code> button. If Zynthian's Alt mode is active, it will '''toggle MIDI recording'''.
* '''Toggle audio record''' with <code>SHIFT</code> + <code>RECORD</code> button. If Zynthian's Alt mode is active, it will '''toggle MIDI recording'''.
* Tap a pad to '''start/stop a sequence'''. The status codes are as follows (pad color will always match the sequence color):
* Tap a pad to '''start/stop a sequence'''. The status codes are as follows (pad color will always match the sequence color):
** Pulsing: Syncing to play/stop.
** Pulsing: Syncing to play/stop.
* Open the '''pattern editor'' for a given sequence, pressing <code>SHIFT</code> + a pad button.
* '''Stop all sequences''' (but not audio/midi playback or recording) pressing <code>STOP ALL CLIPS</code> button.
* Open the '''pattern editor''' for a given sequence, pressing <code>SHIFT</code> + a pad button.
* Start '''recording a pattern'''. For this, press <code>RECORD</code> + a pad button, which will 1) select the chain associated with the group of the sequence, 2) open the pattern editor for that sequence, 3) start playing the sequence and 4) start recording that sequence. If you press the pad again (without holding any other button), the recording will stop. Press again to stop playback too. You can also control the playback/recording with <code>PLAY/PAUSE</code> and <code>RECORD</code> buttons.
* Start '''recording a pattern'''. For this, press <code>RECORD</code> + a pad button, which will 1) select the chain associated with the group of the sequence, 2) open the pattern editor for that sequence, 3) start playing the sequence and 4) start recording that sequence. If you press the pad again (without holding any other button), the recording will stop. Press again to stop playback too. You can also control the playback/recording with <code>PLAY/PAUSE</code> and <code>RECORD</code> buttons.
* If the pattern editor is open, press <code>SHIFT</code> + <code>UP arrow</code> to '''go back to ZynPad'''. Press it again to go to mixer screen.
====The Device mode====
====The Device mode====