Changes

You can use [https://etcher.io/ Etcher], free software that works on Mac, Windows and Linux, to write the image into the SD-card. You can do it from the terminal too, using ''dd'' or ''pv'' cli tools. There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].

You can use [https://etcher.io/ Etcher], free software that works on Mac, Windows and Linux, to write the image into the SD-card. You can do it from the terminal too, using ''dd'' or ''pv'' cli tools. There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].

{{NoteBox|RBPi2 is not currently supported by the latest official zynthian SD-images, so if you want to use a RBPi2, you may need to build your own SD-image.}}

{{NoteBox|RBPi2 is not supported by recent zynthian SD-images. If you want to use a RBPi2, you may need to build your own SD-image.}}

 

== Configuration instructions ==

== Configuration instructions ==