Changes

After downloading and unzipping the SD-image, you have to write it to a suitable SD-card. You need a good-quality SD-card with a '''minimum size of 16GB'''. You can use a bigger one if you like.

After downloading and unzipping the SD-image, you have to write it to a suitable SD-card. You need a good-quality SD-card with a '''minimum size of 16GB'''. You can use a bigger one if you like.

Use [https://etcher.io/ Etcher] (free software works on Mac, Windows or Linux) to write the image into the SD-card, or do it manually. There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].

You can use [https://etcher.io/ Etcher], free software that works on Mac, Windows and Linux, to write the image into the SD-card. You can do it from the terminal too, using ''dd'' or ''pv'' cli tools. There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].

{{NoteBox|RBPi2 is not currently supported by the latest official zynthian SD-images, so if you want to use a RBPi2, you may need to build your own SD-image.}}

{{NoteBox|RBPi2 is not currently supported by the latest official zynthian SD-images, so if you want to use a RBPi2, you may need to build your own SD-image.}}