2,703
edits
Changes
Jump to navigation
Jump to search
Line 294:
Line 294: − + + +
Building a Zynthian Box using official Kits v4.2-v4.6 (view source)
Revision as of 02:06, 8 March 2021
, 02:06, 8 March 2021→Connect the ZynAuCon module to the Hifiberry DAC+ADC Stage
Plug the little 2x10 ribbon cable on the Hifiberry's J1 connector. Next, plug the other end on the ZynAuCon board. Observe that the ribbon cable must be bent forming a 90º angle, so it fits perfectly the space and distance between the 2 IDC connectors.
Plug the little 2x10 ribbon cable on the Hifiberry's J1 connector. Next, plug the other end on the ZynAuCon board. Observe that the ribbon cable must be bent forming a 90º angle, so it fits perfectly the space and distance between the 2 IDC connectors.
[[File:HifiBerryDACADC-Stage-connection-OUT.png|600px]]
[[File:IMG_3410_fixed.JPG|600px]]
FYI, this is the specification for the 10-pin header (J1) on the Hifiberry DAC+ADC Stage:
FYI, this is the specification for the 10-pin header (J1) on the Hifiberry DAC+ADC Stage: