Changes

The ZynAuCon module improves and simplifies the audio wiring by using a small ribbon cable for driving the 4 balanced channels (2 inputs + 2 outputs) to the 4 high-quality Neutrik TSR case-connectors. For mounting the ZynAuCon, secure the 2 x 15mm separators with 2 x black-anodized bolts M2.5. Next, you have to insert the board from inside the case and secure them with the 4 x nuts from the outside. Use a wrench for tightening the nuts, but not too much, and take care of not damaging the surface of the nice aluminum case!!

The ZynAuCon module improves and simplifies the audio wiring by using a small ribbon cable for driving the 4 balanced channels (2 inputs + 2 outputs) to the 4 high-quality Neutrik TSR case-connectors. For mounting the ZynAuCon, secure the 2 x 15mm separators with 2 x black-anodized bolts M2.5. Next, you have to insert the board from inside the case and secure them with the 4 x nuts from the outside. Use a wrench for tightening the nuts, but not too much, and take care of not damaging the surface of the nice aluminum case!!

[[File:IMG_2886_OK_1024.JPG|400px]]

[[File:IMG_3419_fixed.JPG|200px]]

[[File:IMG_2896_OK_1024_fixv41.JPG|400px]]

[[File:IMG_2898_OK_1024.JPG|400px]]

[[File:IMG_3387_fixed.JPG|400px]]

 

[[File:IMG_3395_fixed.JPG|400px]]

[[File:IMG_3401_fixed.JPG|400px]]

===Secure the MIDI connectors===

===Secure the MIDI connectors===