Line 42:
Line 42:
* If you are connected via an ethernet switch, connect the switch to your internet box
* If you are connected via an ethernet switch, connect the switch to your internet box
* If you are directly connected via an ethernet cable, configure the Wifi on the WebConf page:
* If you are directly connected via an ethernet cable, configure the Wifi on the WebConf page:
−
System / WIFI / Add Network
+
[http://zynthian.local/sys-wifi System / WIFI] / Add Network
Mode = ON
Mode = ON
=== Update ZynthianOS ===
=== Update ZynthianOS ===
Now that you are connected to the Internet, you can update Zynthian OS via the WebConf:
Now that you are connected to the Internet, you can update Zynthian OS via the WebConf:
−
Software / Update
+
[http://zynthian.local/sw-update Software / Update
]
−
System / Reboot
+
[http://zynthian.local/sys-reboot System / Reboot]
=== Configure the hardware ===
=== Configure the hardware ===
Configure your hardware setup via the WebConf:
Configure your hardware setup via the WebConf:
−
Hardware / Kit / Custom
+
[http://zynthian.local/hw-kit Hardware / Kit] / Custom
−
Hardware / Audio / ''Select your soundcard on the list''
+
[http://zynthian.local/hw-audio Hardware / Audio] / ''Select your soundcard on the list''
−
Hardware / Display / Generic HDMI Display
+
[http://zynthian.local/hw-display Hardware / Display] / Generic HDMI Display
−
Hardware / Wiring / DUMMIES
+
[http://zynthian.local/hw-wiring Hardware / Wiring] / DUMMIES
−
System / Reboot
+
[http://zynthian.local System/sys-reboot / Reboot]
=== Install VNC Server on the Raspberry Pi ===
=== Install VNC Server on the Raspberry Pi ===
Line 63:
Line 63:
* Option 1 : via the WebConf terminal
* Option 1 : via the WebConf terminal
−
System / Terminal
+
[http://zynthian.local/zynterm System / Terminal]
* Option 2 : via SSH (that's mean via another terminal)
* Option 2 : via SSH (that's mean via another terminal)
Line 102:
Line 102:
For a better use, configure Zynthian UI for headless use in the WebConf:
For a better use, configure Zynthian UI for headless use in the WebConf:
−
Interface / UI options
+
[http://zynthian.local/ui-options Interface / UI options
]
Advanced view : ON
Advanced view : ON
Enable Touch Widgets: ON
Enable Touch Widgets: ON
Line 109:
Line 109:
On stage, you can disconnect the Zynthian from internet and configure it as a hotspot for connecting your devices to it.
On stage, you can disconnect the Zynthian from internet and configure it as a hotspot for connecting your devices to it.
For this, go to the WebConf:
For this, go to the WebConf:
−
System / WIFI / Hotspot
+
[http://zynthian.local/sys-wifi System / WIFI] / Hotspot
== OPTIONAL STEPS ==
== OPTIONAL STEPS ==