2,705
edits
Changes
Jump to navigation
Jump to search
Line 265:
Line 265: + + −
Building a Zynthian Box using an official Kit v4.0 (view source)
Revision as of 13:22, 29 July 2020
, 13:22, 29 July 2020→Connect the Ribbon Bus cable
The Zynthian Kit 4 is designed to use JST connectors which can't be plugged in wrong, so connecting everything is straight-forward:
The Zynthian Kit 4 is designed to use JST connectors which can't be plugged in wrong, so connecting everything is straight-forward:
===Connect the Ribbon Bus cable===
===Connect the Ribbon Bus cable===
Connect the Main Ribbon Bus cable to the Raspberry Pi's 40-pin header and to the Zynaptik module. The red wire is pin 1, so if you are looking at the case from the front, it should be on the right.
Connect the Main Ribbon Bus cable to the Raspberry Pi's 40-pin header and to the Zynaptik module. The red wire is pin 1, so if you are looking at the case from the front, it should be on the right.
[[File:Ribbon.jpeg|400px]]
[[File:Ribbon.jpeg|400px]]
[[File:Ribbon&Hifi&Zynaptik.JPG|400px]]
[[File:Ribbon&Hifi&Zynaptik.JPG|400px]]
===Connect the Controllers===
===Connect the Controllers===