Changes

{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short the JP1 & JP2 jumpers on the zynaptik board.}}

{{NoteBox|If you don’t connect the status LEDs, the MIDI-OUT and MIDI-THRU won’t work unless you short the JP1 & JP2 jumpers on the zynaptik board.}}

Connect the audio output jack connectors to the audio-output header to the Hifiberry soundcard:

Connect the audio output jack connectors to the audio-output header to the Hifiberry soundcard:

[[File:dacplus-adc-top audio-out.jpg|600px]]

[[File:dacplus-adc-top audio-out.jpg|350px]]

[[File:IMG_2414.JPG|600px]]

[[File:IMG_2414.JPG|450px]]

The black wire on the "R" pin, white on the "L" one and red on "GND" (middle).

The black wire on the "R" pin, white on the "L" one and red on "GND" (middle).

{{NoteBox|Some kits have flipped the red and white wires. This is not a problem. Simply look at the black wire.}}

{{NoteBox|Some kits have flipped the red and white wires. This is not a problem. Simply look at the black wire.}}

===Connect the Audio Input Jack connector===

===Connect the Audio Input Jack connector===