88
edits
Changes
Jump to navigation
Jump to search
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 10:37, 13 January 2020
, 10:37, 13 January 2020no edit summary
Line 2:
Line 2:
=Introduction=
=Introduction=
−This tutorial is mainly intended for those who are building a Zynthian Box using one of the ''official'' kits, that i offer here:
+This tutorial is intended for those who are building a Zynthian Box using one of the ''official'' kits, that i offer here:
[http://shop.zynthian.org Zynthian Shop]
[http://shop.zynthian.org Zynthian Shop]
Line 13:
Line 13:
[[File:ZynthianBack.jpg|600px]]
[[File:ZynthianBack.jpg|600px]]
−=Bill of Materials=
+=List of Materials=
* Zynthian Basic Kit v3 (4 x controller v3 + zynaptic circuit + ribbon bus cable)
* Zynthian Basic Kit v3 (4 x controller v3 + zynaptic circuit + ribbon bus cable)
* ZynScreen v1.4 (3.5" touch-display + controller driver)
* ZynScreen v1.4 (3.5" touch-display + controller driver)
−* Raspberry Pi 3
+* [https://www.raspberrypi.org/products/ Raspberry Pi 3 or 3+]
* [https://www.hifiberry.com/products/dacplus HifiBerry DAC+ADC souncard]
* [https://www.hifiberry.com/products/dacplus HifiBerry DAC+ADC souncard]
* Case kit v3, including nuts, bolts and connectors
* Case kit v3, including nuts, bolts and connectors
* Power adapter for Raspberry Pi (5.1v 2.4A with microUSB connector)
* Power adapter for Raspberry Pi (5.1v 2.4A with microUSB connector)
−* 16GB SD Card (a good one, please!)
+* 16GB SD Card (Use a high-quality card)
=Some definitions=
=Some definitions=