393
edits
Changes
→Writing the image to the SD card
= How to build a Zynthian (Prototype-3) =
= How to build a Zynthian =
'''Manual is currently in development! (20150406)'''
'''This manual is currently in development!'''
== Disclaimer ==
== Disclaimer ==
'''Notes:'''
'''Notes:'''
* Pos. 19-22 were ordered directly from Zynthian.
* Pos. 19-22 were ordered directly from Zynthian.
* There is no case in this BoM - You have to build your own.
* There is no case in this BoM - You can build your own or ask Zynthian.
* Total price was 200,27 € (plus shipping).
* Total price was 200,27 € (plus shipping).
! Wire no. || Function || MIDI-IN pin no.
! Wire no. || Function || MIDI-IN pin no.
|-
|-
| 1 || MIDI-IN-5 || 5 (MIDI connector: 2nd from left)
| 1 || MIDI-IN || 2 (MIDI connector: 2nd from left)
|-
|-
| 2 || RxD || 4 (MIDI connector: 2nd from right)
| 2 || MIDI-IN || 4 (MIDI connector: 2nd from right)
|-
|-
|}
|}
|}
|}
[[File:Cable-schema-Controller.png|600px]]
[[File:Cable-schema-Controller.png|600px]]
[[File:Zynthian_alucase_zcontrollers_dual_right_wiring.jpg|600px]]
=== Controller Single Module x 4 (one single rotary encoder each PCB) ===
=== Controller Single Module x 4 (one single rotary encoder each PCB) ===
This step is a bit tricky. Remember that, if you follow the instructions before, you have soldered the pin-rows in the bottom side of PCBs, so numbering is reversed when looking from bottom. You can use a little trick: if you rotate the PCB 180º, then numbering is "left to right" again ;-)
This step is a bit tricky. Remember that, if you followed the instructions before, you have soldered the pin-rows in the bottom side of PCBs, so numbering is reversed when looking from bottom. You can use a little trick: if you rotate the PCB 180º, then numbering is "left to right" again ;-)
So '''you should look at your controller modules from bottom side and with the pin-row on the top of PCB!'''
So '''you should look at your controller modules from bottom side and with the pin-row on the top of PCB!'''
[[File:zynthian_inside_01.jpg|600px]]
[[File:zynthian_inside_01.jpg|600px]]
'''Warning:''' In this photo the controller modules wiring is reversed (1 by 2, 3 by 4). I will change it ASAP ;-)
=== Alternative cabling ===
=== Alternative cabling ===
=== Getting the Image ===
=== Getting the Image ===
You can get the last SD image here:
[http://blog.zynthian.org/download/zynthian_sonar-2016-06-14.img.torrent Download torrent link] (sha1sum: 0067db634260e45f50467c1f90c322187a182872)
[https://discourse.zynthian.org/t/merry-zynthians-and-happy-new-sd-image/314 Gorgona SD Image]
=== Writing the image to the SD card ===
=== Writing the image to the SD card ===
If you got the whole image you can write it to an SD-card. Depending on your OS you have to choose how to create the SD-card. You need a minimum size of 16GB, better 32GB for more sample-sets in future. There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ | https://www.raspberrypi.org/documentation/installation/installing-images/].
If you successfully downloaded the whole image, you can now write it to an SD-card.
You need a minimum size of 16GB, better 32GB SDcard to allow for more instruments and sample-sets in future.
Use Etcher https://etcher.io/ (free software works on Mac, Windows or Linux)
Or do it manually: Depending on your OS you have to choose how to create the SD-card. There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ | https://www.raspberrypi.org/documentation/installation/installing-images/].
== First boot ==
== First boot ==