101
edits
Changes
→The Device mode
* In '''bank A''':
* In '''bank A''':
** Use <code>PAD 1-3</code> and <code>PAD 6</code> to '''move''' around the user interface (up, down, left and right, as shown in the diagram). You can also use the joystick for this.
** Use <code>PADs 1-3</code> and <code>PAD 6</code> to '''move''' around the user interface (up, down, left and right, as shown in the diagram). You can also use the joystick for this.
** '''Cancel''' or '''go back''' with <code>PAD 5</code>.
** '''Cancel''' or '''go back''' with <code>PAD 5</code>.
** '''Accept''' of '''select''' an item, using <code>PAD 7</code>.
** '''Accept''' or '''select''' an item, using <code>PAD 7</code>.
** Launch the '''options''' menu, or the '''admin''' menu, by a short press in <code>PAD 8</code>. Each press will toggle between these two screens. With a ''long press'', it will '''shutdown''' the system (a confirm dialog will appear).
** Launch the '''options''' menu, or the '''admin''' menu, by a short press in <code>PAD 8</code>. Each press will toggle between these two screens. With a ''long press'', it will '''shutdown''' the system (a confirm dialog will appear).
** Open the '''controls''' or '''preset''' screen of a chain, doing a short press in <code>PAD 4</code>. In Zynpad, a ''long press'' of <code>PAD 4/7</code> will open the '''pattern editor''' for the selected sequence.
** Open the '''controls''' or '''preset''' screen of a chain, doing a short press in <code>PAD 4</code>. In Zynpad, a ''long press'' of <code>PAD 4/7</code> will open the '''pattern editor''' for the selected sequence.
* In '''bank B''':
* In '''bank B''':
** Upper row of PADs is used for '''transport buttons''', just like the mixer mode:
** Upper row of PADs is used for '''transport buttons''', just like in the mixer mode:
*** <code>PAD 5</code>: stop all sounds (panic button).
*** <code>PAD 5</code>: stop all sounds ('''panic''' button).
*** <code>PAD 6</code>: toggle audio record.
*** <code>PAD 6</code>: toggle audio '''record'''.
*** <code>PAD 7</code>: stop audio.
*** <code>PAD 7</code>: '''stop''' audio.
*** <code>PAD 8</code>: toggle audio playback.
*** <code>PAD 8</code>: toggle audio '''playback'''.
** Lower row is used as V5 Knob '''press buttons'''. The mapping is from <code>PAD 1</code> to <code>PAD 4</code>, which are used as Knob#1 to Knob#4 press buttons. These buttons are available in CC and PC mode. This is mainly needed for MIDI learning features, where a CC message would establish the control's MIDI learn. CC is needed when a bold/long press is required.
** Lower row is used as V5 Knob '''press buttons'''. The mapping is from <code>PAD 1</code> to <code>PAD 4</code>, which are used as '''Knob#1''' to '''Knob#4''' press buttons. These buttons are available in CC and PC mode. This is mainly needed for MIDI learning features, where a CC message would establish the control's MIDI learn. CC is needed when a bold/long press is required.
This mode also maps the V5 Knobs to <code>K1</code>, <code>K5</code>, <code>K2</code>, <code>K6</code>, in that order.
This mode also maps the V5 Knobs to <code>K1</code>, <code>K5</code>, <code>K2</code>, <code>K6</code>, in that order.