Difference between revisions of "Zynthian Software"

Revision as of 16:40, 28 May 2021

1 Official ZynthianOS SD-Images

This is the last official Zynthian SD-Image, based on Raspberry Pi OS:

Last Stable ZynthianOS (MD5-sum)

Note:

This SD-image is pre-configured for official kits v4 & v3. If you are using a different hardware, your first step should be accessing the webconf and configuring your hardware.

1.1 Instructions

For accessing to the webconf tool, see here
Once logged in go to Hardware -> Kit and select "Custom" then click on save button
Then, stil in the Hardware menu, configure each device: Audio, Display, Wiring (use "Dummies" if you do not use any encoder/switch). Don't forget to save your configuration after each step.
When everything is configured, you can reboot Zynthian using the System -> Reboot menu item

2 Nightly Build SD-Images

If you like to be in the cutting edge, test the latest features and find the bugs, try the nightly builds:

ZynthianOS Nightly Builds

Our nightly build system is based on the fantastic work of @guysoft, the CustomPiOS system:

CustomPiOS is a Raspberry Pi and other ARM devices distribution builder. CustomPiOS opens an already existing image, modifies it and repackages the image ready to ship.

@guysoft has largely contributed to the project by configuring and setting up the ZynthianOS build server. Really big thanks!!

3 Preparing the SD-card

Current images are 8 GB compressed image file compiled for Raspberry Pi 3. These SD card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!

After downloading the SD-image, you have to write it to a SD-card. You need a SD card with a minimum size of 16GB, although you can use a bigger one if you want.

Use Etcher (free software works on Mac, Windows or Linux) to write the image onto the SDcard. Or do it manually! There is a really good manual for this at this link.

Note:

RBPi2 is not currently supported by the latest official zynthian SD images, so if you want to use a RBPi2, you may need to build your own SD image.

4 Build your own image

If you like, you can build your own SD image following these instructions:

Building the SD Image using the Setup Script

Also, you would like to try the new docker-builder (thanks @guysoft!!):

Building Zynthian with Docker

@@ Line 1: / Line 1: @@
-== Official Aruk Stretch SD-Images (Stretch-based) ==
+== Official ZynthianOS SD-Images ==
-The current official Zynthian SD-Image is called '''Aruk'''. It's based in Raspbian Stretch and built using a the CustomPiOS system (thanks @guysoft!!). Currently we have a third Release Candidate (RC-3):
+This is the last official Zynthian SD-Image, based on Raspberry Pi OS:
-  [https://os.zynthian.org/2019-06-26-zynthianos-stretch-lite-1.0.0-RC3.zip ZynthianOS "Aruk Stretch" RC-3] ([https://os.zynthian.org/2019-06-26-zynthianos-stretch-lite-1.0.0-RC3.zip.md5 MD5-sum])
+  '''[https://os.zynthian.org/zynthianos-last-stable.zip Last Stable ZynthianOS]''' ([https://os.zynthian.org/zynthianos-last-stable.zip.md5 MD5-sum])
-it will be the last stretch-based Aruk RC because we have moved to Raspbian Buster.
+{{NoteBox|This SD-image is pre-configured for '''official kits v4 & v3'''. If you are using a different hardware, your first step should be accessing the webconf and configuring your hardware.
-== Testing Aruk Buster SD-Images (Buster-based) ==
-The next official Zynthian SD-Image is called '''Aruk Buster'''. It's the same than the stretch-based one, but buster-based. Currently we have a first Release Candidate (RC-1):
+==== Instructions ====
- [https://os.zynthian.org/2019-09-24-zynthianos-buster-lite-1.0.0-RC1.zip ZynthianOS "Aruk Buster" RC-1] ([https://os.zynthian.org/2019-09-24-zynthianos-buster-lite-1.0.0-RC1.zip.md5 MD5-sum])
+* For accessing to the webconf tool, [[Accessing_Zynthian_from_your_computer#Accessing_the_Web_Configuration_Tool|see here]]
+* Once logged in go to Hardware -> Kit and select "Custom" then click on save button
+* Then, stil in the Hardware menu, configure each device: Audio, Display, Wiring (use "Dummies" if you do not use any encoder/switch). Don't forget to save your configuration after each step.
+* When everything is configured, you can reboot Zynthian using the System -> Reboot menu item
+}}
 == Nightly Build SD-Images ==
-If you really like to be in the cutting edge, try the nightly builds:
+If you like to be in the cutting edge, test the latest features and find the bugs, try the nightly builds:
-  [https://os.zynthian.org ZynthianOS nightly builds]
+  '''[https://os.zynthian.org ZynthianOS Nightly Builds]'''
-but if you do so, please, check that the build is green in the Jenkins panel.
+Our nightly build system is based on the fantastic work of @guysoft, the [https://github.com/guysoft/CustomPiOS CustomPiOS] system:
-{{NoteBox|There are no torrents for Aruk SD-images yet. When the final release is out, we will prepare the torrent files for faster and more reliable downloading.}}
+ ''CustomPiOS is a Raspberry Pi and other ARM devices distribution builder. CustomPiOS opens an already existing image, modifies it and repackages the image ready to ship.''
-== Legacy "Gorgona Omega" SD-Images (Jessie-based) ==
+'''@guysoft has largely contributed to the project by configuring and setting up the ZynthianOS build server. Really big thanks!!'''
-{{WarningBox|Gorgona Omega is at the very end of its life cycle and it's not longer maintained nor fixed. If you use it, probably you will have problems for updating. I strongly suggest using the new ''Aruk SD-image'' (see below).}}
-You can download the old Gorgona SD-Images from here:
- '''[http://zynthian.org/download/zynthian_gorgona_omega_rbpi3_kitv2-2018-04-03.zip.torrent Download Zynthian "Gorgona Omega" SD-image, configured for Kits v2]'''
- SHA1: 601ab5e58d3f08b7cda6f5821d396f6622e93106
- '''[http://zynthian.org/download/zynthian_gorgona_omega_rbpi3_kitv1-2018-04-03.zip.torrent Download Zynthian "Gorgona Omega" SD-image, configured for Kits v1]'''
- SHA1: 53ce2ba3c055698d27108750c2b80313f904c921
-In case you have troubles using Torrent, you can download the Gorgona Omega image from these links:
-* [http://zynthian.org/download/zynthian_gorgona_omega_rbpi3_kitv2-2018-04-03.zip Gorgona Omega, Kit v2]
-* [http://zynthian.org/download/zynthian_gorgona_omega_rbpi3_kitv1-2018-04-03.zip Gorgona Omega, Legacy Kit V1]
-Please, try first with torrent and don't use these "direct download" links unless you really need it:
-* Zynthian server have limits and if everybody is trying to download the SD images directly from there, it will get overloaded and forum, wiki and other Zynthian services will be slower.
-* Torrent should download faster than direct download links because you are downloading from several sources at once.
 == Preparing the SD-card ==
-Current images are 8GB compressed image file compiled for Raspberry Pi 3. These SD card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
+Current images are 8 GB compressed image file compiled for Raspberry Pi 3. These SD card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!
-After downloading the SD-image, you have to write it to a SDcard. You need a SD card with a minimum size of 16GB, although you can use a bigger one if you want.
+After downloading the SD-image, you have to write it to a SD-card. You need a SD card with a '''minimum size of 16GB''', although you can use a bigger one if you want.
 Use [https://etcher.io/ Etcher] (free software works on Mac, Windows or Linux) to write the image onto the SDcard. Or do it manually! There is a really good manual for this at [https://www.raspberrypi.org/documentation/installation/installing-images/ this link].
@@ Line 62: / Line 44: @@
   [https://discourse.zynthian.org/t/new-sd-image-setup-script/283 Building the SD Image using the Setup Script]
-Also, you would like to try the new experimental docker-builder (thanks @guysoft!!):
+Also, you would like to try the new docker-builder (thanks @guysoft!!):
   [https://discourse.zynthian.org/t/building-zynthian-image-now-works-with-docker/2499 Building Zynthian with Docker]