Difference between revisions of "Zynthian Software"

From ZynthianWiki
Jump to navigation Jump to search
Line 1: Line 1:
 +
== Official Aruk Buster SD-Images (Buster-based) ==
 +
 +
The current official Zynthian SD-Image is called '''Aruk Buster'''. It's almost the same than the stretch-based one, but updated and buster-based. Currently we have a first Release Candidate (RC-1):
 +
 +
[https://os.zynthian.org/2019-09-24-zynthianos-buster-lite-1.0.0-RC1.zip ZynthianOS "Aruk Buster" RC-1] ([https://os.zynthian.org/2019-09-24-zynthianos-buster-lite-1.0.0-RC1.zip.md5 MD5-sum])
 +
 +
Although latest nightly builds are quite stable, so you could consider using the last one ...
 +
 +
{{NoteBox|Aruk Buster SD-Image is pre-configured for official Kit v3.}}
 +
 
== Official Aruk Stretch SD-Images (Stretch-based) ==
 
== Official Aruk Stretch SD-Images (Stretch-based) ==
  
Line 8: Line 18:
  
 
{{NoteBox|Aruk Stretch SD-Image is pre-configured for official Kit v2.}}
 
{{NoteBox|Aruk Stretch SD-Image is pre-configured for official Kit v2.}}
 
== Testing Aruk Buster SD-Images (Buster-based) ==
 
 
The next official Zynthian SD-Image is called '''Aruk Buster'''. It's the same than the stretch-based one, but buster-based. Currently we have a first Release Candidate (RC-1):
 
 
[https://os.zynthian.org/2019-09-24-zynthianos-buster-lite-1.0.0-RC1.zip ZynthianOS "Aruk Buster" RC-1] ([https://os.zynthian.org/2019-09-24-zynthianos-buster-lite-1.0.0-RC1.zip.md5 MD5-sum])
 
 
{{NoteBox|Aruk Buster SD-Image is pre-configured for official Kit v3.}}
 
  
 
== Nightly Build SD-Images ==
 
== Nightly Build SD-Images ==
Line 22: Line 24:
  
 
  [https://os.zynthian.org ZynthianOS nightly builds]
 
  [https://os.zynthian.org ZynthianOS nightly builds]
 
but if you do so, please, check that the build is green in the Jenkins panel.
 
 
== Legacy "Gorgona Omega" SD-Images (Jessie-based) ==
 
 
{{WarningBox|Gorgona Omega is at the very end of its life cycle and it's not longer maintained. If you use it, probably you will have problems for updating. I strongly suggest using the new ''Aruk SD-image'' (see above).}}
 
 
You can download the old Gorgona SD-Images from here:
 
 
* [http://zynthian.org/download/zynthian_gorgona_omega_rbpi3_kitv2-2018-04-03.zip Gorgona Omega, Kit v2]
 
 
* [http://zynthian.org/download/zynthian_gorgona_omega_rbpi3_kitv1-2018-04-03.zip Gorgona Omega, Legacy Kit V1]
 
  
 
== Preparing the SD-card ==
 
== Preparing the SD-card ==

Revision as of 01:11, 7 April 2020

1 Official Aruk Buster SD-Images (Buster-based)

The current official Zynthian SD-Image is called Aruk Buster. It's almost the same than the stretch-based one, but updated and buster-based. Currently we have a first Release Candidate (RC-1):

ZynthianOS "Aruk Buster" RC-1 (MD5-sum)

Although latest nightly builds are quite stable, so you could consider using the last one ...

Note:

Aruk Buster SD-Image is pre-configured for official Kit v3.

2 Official Aruk Stretch SD-Images (Stretch-based)

The current official Zynthian SD-Image is called Aruk. It's based in Raspbian Stretch and built using a the CustomPiOS system (thanks @guysoft!!). Currently we have a third Release Candidate (RC-3):

ZynthianOS "Aruk Stretch" RC-3 (MD5-sum)

it will be the last stretch-based Aruk RC because we have moved to Raspbian Buster.

Note:

Aruk Stretch SD-Image is pre-configured for official Kit v2.

3 Nightly Build SD-Images

If you really like to be in the cutting edge, try the nightly builds:

ZynthianOS nightly builds

4 Preparing the SD-card

Current images are 8GB compressed image file compiled for Raspberry Pi 3. These SD card images include all the Zynthian software, properly configured for working with the official kits. Completely ready to use. Plug and play!

After downloading the SD-image, you have to write it to a SD-card. You need a SD card with a minimum size of 16GB, although you can use a bigger one if you want.

Use Etcher (free software works on Mac, Windows or Linux) to write the image onto the SDcard. Or do it manually! There is a really good manual for this at this link.

Note:

RBPi2 is not currently supported by the latest official zynthian SD images, so if you want to use a RBPi2, you may need to build your own SD image.

5 Build your own image

If you like, you can build your own SD image following these instructions:

Building the SD Image using the Setup Script

Also, you would like to try the new experimental docker-builder (thanks @guysoft!!):

Building Zynthian with Docker