Difference between revisions of "Zynthian Box Updating"

From ZynthianWiki
Jump to: navigation, search
Line 1: Line 1:
If you are using the oficial Zynthian SD image, first thing you should do after booting up your Zynthian Box and having the controllers working OK (if not, you can't operate the interface ;-) is updating the software.
+
If you are using the oficial Zynthian SD image, first thing you should do after booting up your Zynthian Box and having the controllers working OK (if not, you can't operate the interface ;-) is updating the software:
  
First time is different and you have to update twice. Follow these steps:
+
  - connect the zynthian box to your router using a RJ45 cable
 
+
- connect the zynthian box to your router using RJ45
+
- '''update zynthian software''' from the admin menu
+
- '''poweroff''' & '''restart'''
+
- '''update zynthian software''' from the admin menu => twice only first time
+
- '''update zynthian library''' from admin menu
+
- '''poweroff''' & '''restart'''
+
 
+
Next time you only need to update once:
+
 
+
  - connect the zynthian box to your router using RJ45
+
 
  - '''update zynthian software''' from the admin menu
 
  - '''update zynthian software''' from the admin menu
 
  - '''update zynthian library''' from the admin menu
 
  - '''update zynthian library''' from the admin menu
  - '''poweroff''' & '''restart'''
+
  - '''restart GUI''' (or '''reboot''') from the admin menu
  
Be warned that using the '''update operating system''' option can break things, so don't do it if you are not completely sure.
+
That's all! ;-)
Any way, you can easily burn a new SD card ;-)
+

Revision as of 20:57, 10 January 2017

If you are using the oficial Zynthian SD image, first thing you should do after booting up your Zynthian Box and having the controllers working OK (if not, you can't operate the interface ;-) is updating the software:

- connect the zynthian box to your router using a RJ45 cable
- update zynthian software from the admin menu
- update zynthian library from the admin menu
- restart GUI (or reboot) from the admin menu

That's all! ;-)