Difference between revisions of "Unofficial hardware"

From ZynthianWiki
Jump to: navigation, search
(Audio interfaces)
m (Displays)
 
Line 4: Line 4:
 
* [http://ozzmaker.com/product/piscreen-3-5-tft-with-touch-for-the-raspberry-pi/ OzzMaker PiScreen 2]
 
* [http://ozzmaker.com/product/piscreen-3-5-tft-with-touch-for-the-raspberry-pi/ OzzMaker PiScreen 2]
 
* [http://www.waveshare.com/product/mini-pc/raspberry-pi/displays.htm WaveShare Displays with GPIO touch-device]
 
* [http://www.waveshare.com/product/mini-pc/raspberry-pi/displays.htm WaveShare Displays with GPIO touch-device]
* Official Raspberry Pi Foundation 7" Display
+
* Official Raspberry Pi Foundation 7" Touch-screen Display
 
** https://www.raspberrypi.org/products/raspberry-pi-touch-display/
 
** https://www.raspberrypi.org/products/raspberry-pi-touch-display/
 
** USA https://www.mcmelectronics.com/product/83-16872
 
** USA https://www.mcmelectronics.com/product/83-16872

Latest revision as of 20:37, 14 June 2018

Displays

Audio interfaces

The Zynthian SD image won’t work without a proper audio device (DAC). The RBPi integrated “audio device” is not suitable (as it has poor performance). The SD image is pre-configured to work with HifiBerry DAC+, although you can use any DAC that works with RBPi (i.e. any I2S device). See Configuring Audio Devices

Tested good

  • HifiBerry
    • HifiBerry DAC+ => hifiberry-dacplus
    • Hifiberry DAC+ Pro => hifiberry-dacplus
    • HifiBerry DAC+ Lite => hifiberry-dac
    • HifiBerry Amp => hifiberry-amp
    • HifiBerry Digi => hifiberry-digi
  • IQAudio
    • IQAudio DAC+ => iqaudio-dacplus
  • AudioInjector
    • AudioInjector Hat => audioinjector-wm8731-audio has Audio Input But be warned that audioinjector soundcards seem quite problematic. IMHO, the 40 pin header is not very reliable

Tested - with problems

  • PiSound https://blokas.io/ PiSound itself works. but currently there are GPIO conflicts with current encoders. has Audio Input also has 5pin MIDI In and MIDI OUT
  • USB audio interfaces (latency problems) has Audio Input

Tested bad

  • Built-in Raspberry 1/8" audio jack. The onboard RBPi soundcard is not suitable at all. It's PWM based (no DAC!) and only 10 bits of resolution. Also, it has a huge latency. Forget getting a decent result with it. You have to use a decent soundcard (with a DAC!) for RBPi.

Untested