101
edits
Changes
→The Step Sequencer mode
* '''Extend a step duration''', by pressing the step, holding it for 0.5 seconds, and then pressing another step (it must be greater in sequence). The source step will increase its duration to fill the space between the two pressed steps (included). The extended duration will be lit in orange. If you press the last pad in orange, it will toggle between full and half step.
* '''Extend a step duration''', by pressing the step, holding it for 0.5 seconds, and then pressing another step (it must be greater in sequence). The source step will increase its duration to fill the space between the two pressed steps (included). The extended duration will be lit in orange. If you press the last pad in orange, it will toggle between full and half step.
* '''Play current pattern''' pressing the <code>PLAY</code> button. You will see the playhead (in white) moving along the steps. Pressing <code>SHIFT</code> + <code>PLAY</code> will start stage-play, which will update the pattern as it moves along the current track (press any pad to stop stage-play). Press <code>PLAY</code> again to stop playing.
* '''Play current sequence''' pressing the <code>PLAY</code> button. You will see the playhead (in white) moving along the steps. Pressing <code>SHIFT</code> + <code>PLAY</code> will start stage-play, which will update the pattern as it moves along the current track (press any pad to stop stage-play). Press <code>PLAY</code> again to stop playing.
* '''Panic stop''' all sounds, pressing <code>SHIFT</code> + <code>STOP ALL CLIPS</code>. Sound will stop immediately.
* '''Panic stop''' all sounds, pressing <code>SHIFT</code> + <code>STOP ALL CLIPS</code>. Sound will stop immediately.
* '''Adjust the tempo''' rotating the knob <code>K1</code>. The TEMPO screen will be shown briefly in the UI. Press <code>SHIFT</code> while rotating for a finer adjustment (0.1 BPM).
* '''Adjust the tempo''' rotating the knob <code>K1</code>. The TEMPO screen will be shown briefly in the UI. Press <code>SHIFT</code> while rotating for a finer adjustment (0.1 BPM).
* '''Adjust sequence's chain level''' rotating the knob <code>K2</code>. Aslo, the Mixer screen will be shown briefly in the UI while adjusting. Press <code>SHIFT</code> while rotating for a finer control.
* '''Adjust sequence's chain level''' rotating the knob <code>K2</code>. Also, the Mixer screen will be shown briefly in the UI while adjusting. Press <code>SHIFT</code> while rotating for a finer control.
* Change the '''velocity, duration, stutter count or stutter duration''' of a step or NotePad, pressing the corresponding pad and rotating one of the following knobs:
* Change the '''velocity, duration, stutter count or stutter duration''' of a step or NotePad, pressing the corresponding pad and rotating one of the following knobs:
* You can also change these properties using '''control levels'''. With a control level, you will use the columns of the pad matrix to see and change the level of certain property of a step or NotePad. These are the key bindings:
* You can also change these properties using '''control levels'''. With a control level, you will use the columns of the pad matrix to see and change the level of certain property of a step or NotePad. These are the key bindings:
** Press <code>VOLUME</code> + a step/NotePad to activate the control level for '''velocity''' adjustment. <code>VOLUME</code> track button will be solid lit in red. Press <code>VOLUME</code> again to exit control level mode.
** Press <code>VOLUME</code> + a step/NotePad to activate the '''control level for velocity''' adjustment. <code>VOLUME</code> track button will be solid lit in red. Press <code>VOLUME</code> again to exit control level mode.
** Press <code>SEND</code> + a step/NotePad for '''stutter count''' adjustment. <code>SEND</code> track button will be solid lit in red.
** Press <code>SEND</code> + a step/NotePad for '''stutter count''' adjustment. <code>SEND</code> track button will be solid lit in red.
** In stutter count control level, press again <code>SEND</code> to switch to '''stutter duration''' adjustment. <code>SEND</code> track button will blink in red. Press <code>SEND</code> again to exit control level mode.
** In stutter count control level, press again <code>SEND</code> to switch to '''stutter duration''' adjustment. <code>SEND</code> track button will blink in red. Press <code>SEND</code> again to exit control level mode.
** If, instead of pressing a pad, you press <code>VOLUME</code> or <code>SEND</code> + one of the 5 soft keys, it will open the control level for each step or NotePad in that row. Now, just pressing another soft key will switch to the related row.
** You can switch between different control levels by pressing the function that is not currently active (otherwise, it will exit that control level).
** You can switch between different control levels by pressing the function that is not currently active (otherwise, it will exit that control level).
** Press a pad in any active column to '''change''' the related step/NotePad value. Press top lit pad to switch between full and half value (the brightness will also change). The following table shows the relation between rows and values of each function (rows are from bottom to top, values are for Full/Half):
** Press a pad in any active column to '''change''' the related step/NotePad value. Press top lit pad to switch between full and half value (the brightness will also change). The following table shows the relation between rows and values of each function (rows are from bottom to top, values are for Full/Half):