101
edits
Changes
→The Step Sequencer mode
* '''Adjust the tempo''' rotating the knob <code>K1</code>. The TEMPO screen will be shown briefly in the UI. Press <code>SHIFT</code> while rotating for a finer adjustment (0.1 BPM).
* '''Adjust the tempo''' rotating the knob <code>K1</code>. The TEMPO screen will be shown briefly in the UI. Press <code>SHIFT</code> while rotating for a finer adjustment (0.1 BPM).
* '''Adjust sequence's chain level''' rotating the knob <code>K2</code>. Aslo, the Mixer screen will be shown briefly in the UI while adjusting. Press <code>SHIFT</code> while rotating for a finer control.
* Change the '''velocity, duration, stutter count or stutter duration''' of a step or NotePad, pressing the corresponding pad and rotating one of the following knobs:
** <code>K1</code>: note duration
** <code>K2</code>: note velocity
** <code>K3</code>: stutter count
** <code>K4</code>: stutter duration
* You can also change these properties using '''control levels'''. With a control level, you will use the columns of the pad matrix to see and change the level of certain property of a step or NotePad. These are the key bindings:
** Press <code>VOLUME</code> + a step/NotePad to activate the '''control level for velocity''' adjustment. <code>VOLUME</code> track button will be solid lit in red. Press <code>VOLUME</code> again to exit control level mode.
** Press <code>SEND</code> + a step/NotePad for '''stutter count''' adjustment. <code>SEND</code> track button will be solid lit in red.
** In stutter count control level, press again <code>SEND</code> to switch to '''stutter duration''' adjustment. <code>SEND</code> track button will blink in red. Press <code>SEND</code> again to exit control level mode.
** You can switch between different control levels by pressing the function that is not currently active (otherwise, it will exit that control level).
** Press a pad in any active column to '''change''' the related step/NotePad value. Press top lit pad to switch between full and half value (the brightness will also change). The following table shows the relation between rows and values of each function (rows are from bottom to top, values are for Full/Half):
{| class="wikitable"
|-
! Row !! Velocity !! Stutter Count !! Stutter Duration
|-
| 1 || 25 / 12 || 2 / 1 || 2 / 1
|-
| 2 || 50 / 38 || 4 / 3 || 4 / 3
|-
| 3 || 76 / 63 || 8 / 6 || 8 / 6
|-
| 4 || 101 / 88 || 12 / 10 || 20 / 10
|-
| 5 || 127 / 114 || 20 / 15 || 40 / 30
|}
<br clear=all>
<br clear=all>