Changes

* A '''Config''' mode, used to configure the MPK internal settings, like the channels, the arpeggiator, and more.

* A '''Config''' mode, used to configure the MPK internal settings, like the channels, the arpeggiator, and more.

Each mode is shown in the MPK display when active. <code>PADs 1-4 A</code> are used as direct access to some of Zynthian GUI screens, like the Mixer, Zynpad or Tempo settings. Each one of these functions or modes is available on every operation mode or screen. Just ensure that '''PC''' (PROG CHANGE) is active on the MPK.

Each mode is shown in the MPK display when active. <code>PADs 1-4 A</code> are used as direct access to some of Zynthian GUI screens:

* <code>PAD 2 A</code>: cycles between '''Zynpad''', the arranger and pattern editor.

* <code>PAD 4 A</code>: toggles between '''snapshot''' and ZS3 screens.

 

Each one of these functions or modes is available on every operation mode or screen. Just ensure that '''PC''' (PROG CHANGE) is active on the MPK.

<br clear=all>

<br clear=all>