Changes

Each mode is shown in the MPK display when active. <code>PADs 1-4 A</code> are used as direct access to some of Zynthian GUI screens, like the Mixer, Zynpad or Tempo settings. Each one of these functions or modes is available on every operation mode or screen. Just ensure that '''PC''' (PROG CHANGE) is active on the MPK.

Each mode is shown in the MPK display when active. <code>PADs 1-4 A</code> are used as direct access to some of Zynthian GUI screens, like the Mixer, Zynpad or Tempo settings. Each one of these functions or modes is available on every operation mode or screen. Just ensure that '''PC''' (PROG CHANGE) is active on the MPK.

====The Mixer mode====

====The Mixer mode====

This is the default mode, but you can switch back to it with '''PROG CHANGE''':<code>PAD 5</code>. You should see <code>Zynthian MIXER</code> in the display of the MPK. In this mode, you can use the Knobs to adjust chains settings. The general rule is: <code>PAD x</code> + <code>Knob y</code> to adjust the setting '''x''' of chain '''y'''. You can adjust chains 1 to 8 in bank A, and chains 9 to 16 in bank B. The functions that you can change are:

This is the default mode, but you can switch back to it with '''PROG CHANGE''':<code>PAD 5</code>. You should see <code>Zynthian MIXER</code> in the display of the MPK. In this mode, you can use the Knobs to adjust chains settings. The general rule is: <code>PAD x</code> + <code>Knob y</code> to adjust the setting '''x''' of chain '''y'''. You can adjust chains 1 to 8 in bank A, and chains 9 to 16 in bank B. The functions that you can change are:

<p style="margin: 1em 0 1.5em; padding: 1em; background-color: #fef6e7; display:inline-block">

<p style="margin: 1em 0 1.5em; padding: 1em; background-color: #fef6e7; display:table-cell">

'''NOTE''': Remember to put PAD CONTROLS in '''CC mode'''. The pads in ''note'' mode will only trigger the assigned notes.

'''NOTE''': Remember to put PAD CONTROLS in '''CC mode'''. The pads in ''note'' mode will only trigger the assigned notes.

</p>

</p>

The joystick in this mode affects the pitch-bend (in the Y axis), and sends <code>CC</code> messages, <code>CC#32</code> for '''-X''' (left) and <code>CC#33</code> for '''+X''' (right) values, available for MIDI learning.

The joystick in this mode affects the pitch-bend (in the Y axis), and sends <code>CC</code> messages, <code>CC#32</code> for '''-X''' (left) and <code>CC#33</code> for '''+X''' (right) values, available for MIDI learning.

====The Device mode====

====The Device mode====

[[File:akai_mpk_mini_mk3_device_mode.png|800px|right]]

[[File:akai_mpk_mini_mk3_device_mode.png|800px|right]]

====The Pattern mode====

====The Pattern mode====