240
edits
Changes
Building a Zynthian Box using an official Kit v3 (view source)
Revision as of 12:17, 12 July 2019
, 12:17, 12 July 2019→Assembling your Zynthian Box
Line 106:
Line 106:
===Secure the Jack connectors===
−Put the rings on the outer side of the case to avoid damaging the case surface when you tighten the nuts.
−[[File:photo-not-available.jpg|600px]]
−===Secure the MIDI-IN/OUT/THRU connectors===
−Just insert the connector with the JST-wire from the out-side of the case and the nut from the innerside. A pair of pliers can be useful for tighten.
−[[File:photo-not-available.jpg|600px]]
−===Mount the MIDI activity LEDS===
−Insert the 3 LEDS in the case holes. You may want to push the LEDs with something more rigid than your finger. The screwdriver's handle could be fine.
−[[File:photo-not-available.jpg|600px]]
−[[File:IMG_2365.JPG|600px]]
−When it's done, you have to plug the 2 LED wires (red/black) with the 2 spare wires on the MIDI JST harness (green/yellow). Polarity is important, so don't cross the wires:
− * JST Green wire (1) => LED's Anode (LED's red wire/long lead)
− * JST Yellow wire (2) => LED's Cathode (LED's black wire/short lead)
−[[File:photo-not-available.jpg|600px]]
https://discourse.zynthian.org
https://discourse.zynthian.org
+
+===Secure the Jack connectors===
+
+Put the rings on the outer side of the case to avoid damaging the case surface when you tighten the nuts.
+
+[[File:IMG_2396.JPG|400px]]
+[[File:IMG_2397.JPG|400px]]
+[[File:IMG_2398.JPG|400px]]
+
+===Secure the MIDI-IN/OUT/THRU connectors===
+
+Just insert the connector with the JST-wire from the out-side of the case and the nut from the innerside. A pair of pliers can be useful for tighten.
+
+[[File:IMG_2400.JPG|400px]]
+[[File:IMG_2401.JPG|400px]]
+[[File:IMG_2402.JPG|400px]]
+
+===Mount the MIDI activity LEDS===
+
+Insert the 3 LEDS in the case holes. You may want to push the LEDs with something more rigid than your finger. The screwdriver's handle could be fine.
+
+[[File:photo-not-available.jpg|600px]]
+[[File:IMG_2365.JPG|600px]]
+
+When it's done, you have to plug the 2 LED wires (red/black) with the 2 spare wires on the MIDI JST harness (green/yellow). Polarity is important, so don't cross the wires:
+
+ * JST Green wire (1) => LED's Anode (LED's red wire/long lead)
+ * JST Yellow wire (2) => LED's Cathode (LED's black wire/short lead)
+
+[[File:photo-not-available.jpg|600px]]
+
===Assemble the Main Computing Block===
===Assemble the Main Computing Block===
Line 139:
Line 170:
[[File:photo-not-available.jpg|600px]]
[[File:photo-not-available.jpg|600px]]
−===Secure the Display===
===Secure the Display===