Changes

This screen is shown after you have chosen a preset. Your instrument is now enabled and playable and you can modify the parameters.

This screen is shown after you have chosen a preset. Your instrument is now enabled and playable and you can modify the parameters.

Turning any of the 4 knobs changes the values of the parameters displayed in the boxes at the sides of the screen adjacent to each knob. You also can use the touch interface to change the values. See below.

Turning any of the 4 knobs will change the value of the parameter displayed in the boxes adjacent to each knob. You also can use the touch interface to change the values. See below.

<br clear=all>

<br clear=all>

====XY-Controller====

====XY-Controller====

[[File:Zynthian_ui_xy_select.png|400px|right]]

[[File:Zynthian_ui_xy_select.png|400px|right]]

If you click 2 switches at once, you enter XY-control mode. The 2 controllers you clicked are green and you can choose the desired parameters to control by rotating the controller. Of course, you can navigate the controller pages by clicking select, etc. so you can select parameters from different pages.

If you click 2 knobs at once, you enter XY-control mode. The 2 controllers you clicked are green, and you can choose the desired parameters to control by rotating the controller. You can also navigate the controller pages by clicking select and so on. So you can select parameters from different pages.

<br clear=all>

<br clear=all>

[[File:Zynthian_ui_xy_controller.png|400px|right]]

[[File:Zynthian_ui_xy_controller.png|400px|right]]

Once you have selected the right parameters, touch the screen for entering the XY-control-pad (using the touchscreen ala Kaoss Pad).  

Once you have selected the right parameters, touch the screen to enter the XY-control-pad (using the touchscreen ala Kaoss Pad).  

Click ''back'' for returning to XY-select or bold-click ''back'' for returning to control screen.

Click ''back'' to return to XY-select or bold-click ''back'' to return to the control screen.

<br clear=all>

<br clear=all>

You can press the Layer switch to step over the layer list. If you bold-press, the layer list screen will be shown.

You can press the Layer switch to step over the layer list. If you bold-press, the layer list screen will be shown.

Press the Back switch to return to previous screen. If you press bold-Back, then you will go 2 screens backwards.

Press the Back switch to return to previous screen. If you press bold-Back, you will go 2 screens backwards.

<br clear=all>

<br clear=all>