Difference between revisions of "Zynthian Box Updating"

From ZynthianWiki
Jump to: navigation, search
Line 1: Line 1:
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and getting the controllers working, is updating the software.
+
If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and getting the controllers working, is updating the software. You can do it easily from the Zynthian's UI:
 
+
You can do it easily from the Zynthian's UI:
+
  
 
* Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. You can also configure the WIFI connection.
 
* Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. You can also configure the WIFI connection.
 
* Click '''update software''' from the UI's Admin Menu
 
* Click '''update software''' from the UI's Admin Menu
 
* Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
 
* Click '''restart UI''' (or '''reboot''') from the UI's Admin Menu
 
  
 
You can also do it from the command line using this command:
 
You can also do it from the command line using this command:

Revision as of 14:01, 24 April 2018

If you are using the official Zynthian SD Image, the first thing you should do after booting up your Zynthian Box and getting the controllers working, is updating the software. You can do it easily from the Zynthian's UI:

  • Connect your Zynthian Box to your router/switch using an Ethernet RJ45 cable. You can also configure the WIFI connection.
  • Click update software from the UI's Admin Menu
  • Click restart UI (or reboot) from the UI's Admin Menu

You can also do it from the command line using this command:

 /zynthian/zynthian-sys/scripts/update_zynthian.sh

If you don't know how to access your zynthian using the command line, read this: